Select Page

Hastelloy B3 Butt weld Fittings

image

In India, we are the largest provider of Hastelloy B3 pipe elbows, Hastelloy DIN 2.4600 cross exporters, Hastelloy B3 3D pipe bends, B3 Hastelloy alloy reducers, Hastelloy B3 180 degree bends, Manufacturer of Hastelloy B3 45 degree elbows

Astm B366 B3 Hastelloy Alloy 90 degree Elbow Exporters and Suppliers in Mumbai, India, Hastelloy UNS N010675 Seamless Pipe Fittings Exporters, Hastelloy UNS N010675 Seamless Pipe Fittings Suppliers, Hastelloy UNS N010675 Seamless Pipe Fittings Suppliers

DETAILED INFORMATION

In recent years, MehtaMetals.com has established itself as one of the leading manufacturers, suppliers and traders of Hastelloy Alloy B3 Butt Weld Fittings in the industry. Hastelloy B3 Cross Pipe Fittings (UNS N10675) are an additional member of the nickel-molybdenum alloy family with excellent resistance to hydrochloric acid at all temperatures and concentrations within fittings is a Nickel – Molybdenum alloy which gives excellent resistance to hydrochloric acid at all concentrations and temperatures from ambient to high. This Hastelloy B3 Elbow is used in aircraft, furnace and chemical process components, honeycombs and gas turbine combustion section components. Our Hastelloy B3 Tee Pipe Fittings exhibits extremely high resistance to pure hydrochloric, hydrobromic, and sulfuric acids. 

Our Hastelloy B3 Reducers are also available in custom sizes and shapes. Our Hastelloy B3 Stub End Pipe Fittings, with a minimum nickel content of 72 %, are virtually resistant to chloride – ion stress corrosion cracking. A high-temperature, high-strength caustic alkali can cause stress-corrosion cracking on these Hastelloy B3 End Cap Pipe Fittings. Before a Hastelloy B3 End Pipe Cap is used for such a service, it should be fully stress-relieved at a temperature of 1650 degrees Fahrenheit for one hour or 1450 degrees Fahrenheit for four hours (900 degrees Celsius for one hour or 790 degrees Celsius for four hours) before use, and the operating stresses should be kept as low as possible.

 

CITIES WE DELIVER

Adoni, Amaravati, Anantapur, Chandragiri, Chittoor, Dowlaiswaram ,Eluru, Guntur, Kadapa, Kakinada, Kurnool, Machilipatnam, Nagarjunakoṇḍa, Rajahmundry, Srikakulam, Tirupati, Vijayawada, Visakhapatnam, Vizianagaram, Yemmiganur, Itanagar, Dhuburi, Dibrugarh, Dispur, Guwahati, Jorhat, Nagaon, Sivasagar, Silchar, Tezpur, Tinsukia, Ara, Barauni, Begusarai, Bettiah, Bhagalpur, Bihar, Sharif, Bodh Gaya, Buxar, Chapra, Darbhanga, Dehri, Dinapur Nizamat, Gaya, Hajipur, Jamalpur, Katihar, Madhubani, Motihari, Munger, Muzaffarpur, Patna, Purnia, Pusa, Saharsa, Samastipur, Sasaram, Sitamarhi, Siwan, Chandigarh, Ambikapur, Bhilai, Bilaspur, Dhamtari, Durg, Jagdalpur, Raipur, Rajnandgaon, Daman, Diu, Silvassa, Delhi, New Delhi, Madgaon, Panaji, Ahmadabad, Amreli, Bharuch, Bhavnagar, Bhuj, Dwarka, Gandhinagar, Godhra, Jamnagar, Junagadh, Kandla, Khambhat, Kheda, Mahesana, Morbi, Nadiad, Navsari, Okha, Palanpur, Patan, Porbandar, Rajkot, Surat, Surendranagar, Valsad, Veraval, Ambala, Bhiwani, Chandigarh, Faridabad, Firozpur Jhirka, Gurugram, Hansi, Hisar, Jind, Kaithal, Karnal, Kurukshetra, Panipat, Pehowa, Rewari, Rohtak, Sirsa, Sonipat, Bilaspur, Chamba, Dalhousie, Dharmshala, Hamirpur, Kangra, Kullu, Mandi, Nahan, Shimla, Una, Anantnag, Baramula, Doda, Gulmarg, Jammu, Kathua, Punch, Rajouri, Srinagar, Udhampur, Bokaro, Chaibasa, Deoghar, Dhanbad, Dumka, Giridih, Hazaribag, Jamshedpur, Jharia, Rajmahal, Ranchi, Saraikela, Badami, Ballari, Bengaluru, Belagavi, Bhadravati, Bidar, Chikkamagaluru, Chitradurga, Davangere, Halebid, Hassan, Hubballi-Dharwad, Kalaburagi, Kolar, Madikeri, Mandya, Mangaluru, Mysuru, Raichur, Shivamogga, Shravanabelagola, Shrirangapattana, Tumakuru, Vijayapura, Alappuzha, Vatakara, Idukki, Kannur, Kochi, Kollam, Kottayam, Kozhikode, Mattancheri, Palakkad, Thalassery, Thiruvananthapuram, Thrissur, Kargil, Leh, Balaghat, Barwani, Betul, Bharhut, Bhind, Bhojpur, Bhopal, Burhanpur, Chhatarpur, Chhindwara, Damoh, Datia, Dewas, Dhar, Dr. Ambedkar Nagar (Mhow), Guna, Gwalior, Hoshangabad, Indore, Itarsi, Jabalpur, Jhabua, Khajuraho, Khandwa, Khargone, Maheshwar, Mandla, Mandsaur, Morena, Murwara, Narsimhapur, Narsinghgarh, Narwar, Neemuch, Nowgong, Orchha, Panna, Raisen, Rajgarh, Ratlam, Rewa, Sagar, Sarangpur, Satna, Sehore, Seoni, Shahdol, Shajapur, Sheopur, Shivpuri, Ujjain, Vidisha, Ahmadnagar, Akola, Amravati, Aurangabad, Bhandara, Bhusawal, Bid, Buldhana, Chandrapur, Daulatabad, Dhule, Jalgaon, Kalyan, Karli, Kolhapur, Mahabaleshwar, Malegaon, Matheran, Mumbai, Nagpur, Nanded, Nashik, Osmanabad, Pandharpur, Parbhani, Pune, Ratnagiri, Sangli, Satara, Sevagram, Solapur, Thane, Ulhasnagar,n Vasai-Virar, Wardha, Yavatmal, Imphal, Cherrapunji, Shillong, Aizawl, Lunglei, Kohima, Mon, Phek, Wokha, Zunheboto, Balangir, Baleshwar, Baripada, Bhubaneshwar, Brahmapur, Cuttack, Dhenkanal, Kendujhar, Konark, Koraput, Paradip, Phulabani, Puri, Sambalpur, Udayagiri, Karaikal, Mahe, Puducherry, Yanam,  Amritsar, Batala, Chandigarh, Faridkot, Firozpur, Gurdaspur, Hoshiarpur, Jalandhar, Kapurthala, Ludhiana, Nabha, Patiala, Rupnagar,  Sangrur, Abu, Ajmer, Alwar, Amer, Barmer, Beawar, Bharatpur, Bhilwara, Bikaner, Bundi, Chittaurgarh, Churu, Dhaulpur, Dungarpur, Ganganagar, Hanumangarh, Jaipur, Jaisalmer, Jalor, Jhalawar, Jhunjhunu, Jodhpur, Kishangarh, Kota, Merta, Nagaur, Nathdwara, Pali, Phalodi, Pushkar, Sawai Madhopur, Shahpura, Sikar, Sirohi, Tonk, Udaipur, Gangtok, Gyalshing, Lachung, Mangan, Arcot, Chengalpattu, Chennai, Chidambaram, Coimbatore, Cuddalore, Dharmapuri, Dindigul, Erode, Kanchipuram, Kanniyakumari, Kodaikanal, Kumbakonam, Madurai, Mamallapuram, Nagappattinam, Nagercoil, Palayamkottai, Pudukkottai, Rajapalayam, Ramanathapuram, Salem, Thanjavur, Tiruchchirappalli, Tirunelveli, Tiruppur, Thoothukudi, Udhagamandalam, Vellore, Hyderabad, Karimnagar, Khammam, Mahbubnagar, Nizamabad, Sangareddi, Warangal, Agartala, Agra, Aligarh, Amroha, Ayodhya, Azamgarh, Bahraich, Ballia, Banda, Bara Banki, Bareilly, Basti, Bijnor, Bithur, Budaun, Bulandshahr, Deoria, Etah, Etawah, Faizabad, Farrukhabad-cum-Fatehgarh, Fatehpur, Fatehpur Sikri, Ghaziabad, Ghazipur, Gonda, Gorakhpur, Hamirpur, Hardoi, Hathras, Jalaun, Jaunpur, Jhansi, Kannauj, Kanpur, Lakhimpur, Lalitpur, Lucknow, Mainpuri, Mathura, Meerut, Mirzapur-Vindhyachal, Moradabad, Muzaffarnagar, Partapgarh, Pilibhit, Prayagraj, Rae Bareli, Rampur, Saharanpur, Sambhal, Shahjahanpur, Sitapur, Sultanpur, Tehri, Varanasi, Almora, Dehra Dun, Haridwar, Mussoorie, Nainital, Pithoragarh, Alipore, Alipur Duar, Asansol, Baharampur, Bally, Balurghat, Bankura, Baranagar, Barasat, Barrackpore, Basirhat, Bhatpara, Bishnupur, Budge Budge, Burdwan, Chandernagore, Darjeeling, Diamond Harbour, Dum Dum, Durgapur, Halisahar, Haora, Hugli, Ingraj Bazar, Jalpaiguri, Kalimpong, Kamarhati, Kanchrapara, Kharagpur, Cooch Behar, Kolkata, Krishnanagar, Malda, Midnapore, Murshidabad, Nabadwip, Palashi, Panihati, Purulia, Raiganj, Santipur, Shantiniketan, Shrirampur, Siliguri, Siuri, Tamluk, Titagarh

Hastelloy B3 Butt weld Fittings Specification

 

Hastelloy B3 Pipe Fittings Specifications

Specifications

ASTM B366 / ASME SB366

Size

Seamless Butt Weld Fittings: 1/2″ – 10″, Welded Butt Weld Fittings: 1/2″ – 48″

Standards

ASME/ANSI B16.9, ASME B16.28, MSS-SP-43

Thickness

5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75

Type

Seamless / Welded / Fabricated

Hastelloy B3 Butt weld Fittings Chemical Composition

 

Hastelloy B3

Ni

C

Mo

Mn

Si

Fe

Cu

Ti

Co

Cr

65.0 min

0.01 max

28.5

3.0 max

0.10 max

1.5

0.20 max

0.2 max

3.0 max

1.5

Hastelloy B3 Butt weld Fittings Mechanical Properties

 

Density

Melting Point

Tensile Strength

Yield Strength (0.2%Offset)

Elongation

9.2 g/cm3

1370 °C (2550 °F)

Psi – 1,15,000 , MPa –760

Psi – 52,000 , MPa – 350

40%

Hastelloy B3 Butt weld Fittings Equivalent Grade

 

STANDARD UNS WERKSTOFF NR.
Hastelloy B3 N010675 2.4600

Hastelloy B3 Butt weld Fittings Types

  • Equal cross Hastelloy B3
  •  B3 Buttweld Pipe Fittings
  •  Pipe Tee in Hastelloy N010675
  •  Alloy pipe bend B3
  •  U-Bend Hastelloy B3
  •  B3 Alloy Buttweld Fittings
  •  Buttweld pipe fittings in Hastelloy
  •  Reducing Tee for Alloy B3
  •  90-degree bend in Hastelloy Alloy B3
  •  Hastelloy B3 equal tee with WNR. 2.4600
  •  Lateral tee in Hastelloy B3
  •  The alloy B3 unequal tee
  •  N010675 Hastelloy Stub Ends
  •  Elbow in alloy B3 45 degrees
  •  Alloy B3 pipe cap in Hastelloy
  •  Stub End for Alloy B3
  • Stainless steel buttweld fittings
  •  Hastelloy pipe end cap B3
  • Dish Cap Alloy B3
  •  Seamless B3 alloy fittings
  • Alloy B3 pipe bends UNS N010675
  •  Welded Hastelloy B3 fittings
  • Short Radius Elbow in Alloy B3
  • Concentric Reducer B3 Hastelloy B3
  • Short Hastelloy Stub End N010675
  • Cross-section of Hastelloy B3
  • Long Radius Elbow in B3 Alloy
  • Fittings for Hastelloy B3 pipes
  • 2.4600 Eccentric Reducer in alloy WNR
  • N010675 Alloy B3 90 Degree Elbow

Hastelloy B3 Butt weld Fittings Widest Stock

  • Eccentric reducers made of Hastelloy B3 as per ASTM B366
  •  Exporter of Hastelloy® Alloy B3 45° Long Radius Elbows
  •  Stub Ends for Hastelloy B3 in accordance with ASME SB366
  •  90° Hastelloy B3 Reducing Elbow
  •  180° Hastelloy B3 LR Return Bend
  •  Exporter of Hastelloy B3 90° LR elbows
  •  Concentric Reducer Hastelloy B3
  •  Supplier of Hastelloy B3 1.5D elbows
  •  Hastelloy B3 pipe caps according to ANSI B16.9
  •  Reducing Tee for Hastelloy B3
  •  Hastelloy B3 Equal Cross Manufacturer according to ASME SB366
  •  Industrial pipe fittings made of Hastelloy Grade B3
  •  Seamless Hastelloy B-3 pipe fittings
  •  Two joint Hastelloy B3 pipe fittings
  •  B-3 End Caps in Hastelloy Alloy
  •  Hastelloy B3 10D elbows according to ASTM B366
  •  Stub ends for Hastelloy B3 lap joints
  •  Reducing Cross Hastelloy B3
  •  Supplier of alloy B3 short radius elbows
  •  India's Best Hastelloy B3 Pipe Fittings

Hastelloy B3 Butt weld Fittings Price List

  • The price of the B3 Buttweld Fittings is US $1-5 / Piece (FOB Price).
  • The price of Hastelloy B3 pipe fittings is $0.07 per piece.
  • Buttweld Fittings for Hastelloy US $0.01-3 / Piece (FOB Price)
  • Hastelloy Buttweld Fittings ASTM B366 B3 Hastelloy Buttweld Fittings US $0.1-0.2 / Piece (FOB Price)
  • The price for B3 pipe fittings is US $1-5 / piece (FOB)

Alloy 630 Round Bars Heat Treatment

Designation Processing
Condition A

Heat treated at 1900°F*25°F for 1/2 hour, air cooled or oil quenched to below 90°F. Usually performed at a mill.

In most applications, 17-4 stainless steel should not be used in Condition A, even though it may provide the necessary tensile strength. The structure is an untempered martensite that has low fracture toughness and ductility, while having poor resistance to stress-corrosion cracking. Superior service performance is assured by using 17-4 stainless steel in the heat-treated condition.

For optimum machining results; if no ageing condition is specified, H1150 should be used.

H900 A material heated at 900°F*15°F for 1 hour and cooled by air. High hardness but low toughness. Sensitive to stress corrosion cracking. Heating for 4 hours improves toughness with about a 4 ksi reduction in tensile and yield.

H925, H1025, H1075,

H1100, H1150

A material heated 4 hours at a specific temperature, then cooled by air.
HH1150 The material was heated for 4 hours at 1150F, cooled by air, and then heated for another 4 hours at 1150F and cooled by air.
H1150-M Material heated at 1400°F*25°F for 2 hours, cooled by air, then heated at 1150°F*15°F for 4 hours and cooled by air.

 

Hastelloy B3 Butt weld Fittings Test Certificate

MehtaMetals.com provides Manufacturer TCs (Test Certificates) as per EN 10204/3.1B, Raw Material Certificates, 100% Radiography Test Reports, and Third Party Inspection Reports. Additionally, we provide standard certificates such as EN 10204 3.1 and other requirements such as NACE MR 01075. Ferrite content is provided in accordance with the norms, as requested by clients.

As per EN 10204/3.1B,

A certificate of raw materials should be provided

The radiography test report must be 100% accurate

Reports of inspections performed by third parties, etc.

Hastelloy B3 Butt weld Fittings Value Added Service

Material Testing:

In order to ensure the quality of our products, we at MehtaMetals.com make sure that all of our materials go through strict quality tests before they are dispatched to our clients.

  • In addition to mechanical testing, such as tensile testing of the area,
  • A hardness test should be performed
  • A chemical analysis based on spectrophotometry is performed
  • PMI testing is used to identify positive materials
  • Tests for flattening the surface
  • It includes both MicroTests as well as MacroTests
  • The Pitting Resistance Test is one of them
  • The flaring test should be conducted
  • Testing for intergranular corrosion (IGC) is one of the most important tests

Documentation

  • A commercial invoice that includes the HS code as part of the invoice
  • A packing list with net and gross weights, the number of boxes, and markings and numbers
  • The Certificate of Origin must be legalised/attested by a chamber of commerce or an embassy
  • Certificate of Fumigation (Certificate of Fumigation)
  • Test reports for raw materials
  • Traceability records for materials
  • A quality assurance plan (QAP) must be developed
  • Charts for the application of heat
  • Certificates of certification for NACE MR0103 and NACE MR0175 tests
  • Material Test Certificates (MTCs) in accordance with EN 10204 3.1 and EN 10204 3.2
  • A letter of guarantee from the company
  • Laboratory test reports that have been approved by NABL
  • WPS/PQR, Welding Procedure Specification/Procedure Qualification Record
  • The Generalised System of Preferences (GSP) form A for the purposes of the GSP

Hastelloy B3 Butt weld Fittings Other Types

B3 Hastelloy Pipe Fittings, B-3 Hastelloy Alloy Buttweld Fittings, Hastelloy® Alloy B3 Buttweld Pipe Fittings, Nickel Alloy B3 Butt Weld Pipe Fittings, B-3 Hastelloy Buttweld Pipe Fittings Supplier, B3 Alloy Pipe Fittings, Hastelloy® Alloy B3 Buttweld Elbows Supplier, B3 Alloy Pipe Fittings, Hastelloy B3 Pipe Fittings, Hastelloy® B3, Alloy B3 Buttweld Elbow Stockists, ASTM B366 Hastelloy B3, B3 Hastelloy® B3, Alloy B3, B-3 Hastelloy B3 Pipe Elbows, Hastelloy® B3, Alloy B3. Pipe Elbow, Hastelloy Alloy B3 90° Degree Elbow, Hastelloy® B3 180 Degree Elbow Traders, MSS-SP-43 B-3 Hastelloy Short Radius Elbow, MSS SP-79 Nickel Alloy B3 LR Elbow, B-3 Hastelloy Alloy ASME SB366 Long Radius Elbow, Hastelloy Grade in B3 R=1D, 2D, 3D, 5D, 6D, 8D, 10D Buttweld Elbow, Werkstoff No. 2.4600 HaWeld Elbow in B3, Werkstoff No. 2.4600 Hastelloy Alloy Alloy Buttweld Tee, Hastelloy B3 Equal Tee, UNS N10675 Hastelloy Unequal Tee, Nickelvac® HB-3 Reducing Tee Stockholder, Hastelloy® Alloy Buttweld Tee, Hastelloy B3 Equal Tee, Hastelloy B3 Equal Tee, Hastelloy Unequal Tee, Hastelloy B3 EEEEEEEEEEEEEE, Hastelloy® B3 Buttweld Reducers, Supplier of Hastelloy B-3 Concentric Reducer, B3 Nickel Alloy B366 Concentric Reducer, Manufacturer of Hastelloy B3 Eccentric Reducer Traders, Hastelloy® Alloy B-3 Butt weld Pipe Cross, ASME B16.28 Hastelloy B3 Equal Cross Dealer, Hastelloy® Unequal Cross Stockholders, B3 Hastelloy Reducing Cross Hastelloy B3 Buttweld Pipe Cap Wholesaler, Manufacturer of SB366 B-3 Alloy End Pipe Cap, Supplier of Hastelloy® B3 End Cap, Stockholders of B-3 Nickel Alloy Buttweld Seamless Pipe Fittings, Exporters of Hastelloy® Alloy B3 Welded Pipe Fittings, ASTM B366 Hastelloy B3 Stub End Stockists

Hastelloy B3 Butt weld Fittings Cross Dimensions

Nominal

Pipe

Size

Outside

Diameter

Caps

Straight Tees

Straight Crosses

Stub Ends

(inches)

(mm)

(inches)

Length

(inches)

Center to End

(inches)

Center to End

(inches)

Lap Diameter

(inches)

Long Length

(inches)

Short Length

(inches)

1/2

21.3

0.840

1

1

1 3/8

3

2

3/4

26.7

1.050

1

1 1/8

1 11/16

3

2

1

33.4

1.315

1 1/2

1 1/2

1 1/2

2

4

2

1 1/4

42.2

1.660

1 1/2

1 7/8

1 7/8

2 1/2

4

2

1 1/2

48.3

1.900

1 1/2

2 1/4

2 1/4

2 7/8

4

2

2

60.3

2.375

1 1/2

2 1/2

2 1/2

3 5/8

6

2 1/2

2 1/2

73.0

2.875

1 1/2

3

3

4 1/8

6

2 1/2

3

88.9

3.500

2

3 3/8

3 3/8

5

6

2 1/2

3 1/2

101.6

4.000

2 1/2

3 3/4

3 3/4

5 1/2

6

3

4

114.3

4.500

2 1/2

4 1/8

4 1/8

6 3/16

6

3

5

141.3

5.563

3

4 7/8

4 7/8

7 5/16

8

3

6

168.3

6.625

3 1/2

5 5/8

5 5/8

8 1/2

8

3 1/2

8

219.1

8.625

4

7

7

10 5/8

8

4

10

273.1

10.750

5

8 1/2

8 1/2

12 3/4

10

5

12

323.9

12.750

6

10

10

15

10

6

Hastelloy B3 Butt weld Fittings Inventory

  • B3 Nickel Alloy Buttweld Fittings
  • Exporter of B3 Hastelloy Stub Ends
  • A Hastelloy Grade B3 45° elbow is available
  • Calculator for Alloy B3 Pipe Fittings Weight
  • Supplier of nickel alloy B3 butt weld fittings
  • Fittings for Schedule 40 Hastelloy B3 pipe
  • Fittings for Buttweld Pipe Fittings UNS N10675
  • Pipe Fittings with Butt Welds 2.4600
  • Hastelloy® Alloy B3 Pipe Elbows, ASTM B366
  • Hose Fittings Hastelloy B3 8 Inch
  • Price of Hastelloy B3 90 degree elbows
  • Seamless Alloy B3 pipe fittings
  • Hastelloy B3 SR elbows certified to ANSI B16.9
  • Cross Weight Chart for Hastelloy B3
  • Hastelloy B3 Long Stub Ends Schedule 80
  • Long Stub End Stockists for Hastelloy® Alloy B3
  • Buttweld pipe fittings in Hastelloy B3
  • Hastelloy Pipe End Cap Grade B3
  • Hastelloy B3 Buttweld Fittings with Large Diameters
  • Buttweld fittings UNS N10675
  • Seamless Hastelloy B3 pipe fittings
  • Concentric reducer made of Hastelloy Alloy B3
  • Price list for Hastelloy Alloy B3 Buttweld Fittings
  • Pipe fittings made of alloy B3
  • Butt weld fittings made from alloy B3
  • Piggable Hastelloy® Alloy B3
  • Price list for B3 Hastelloy pipe fittings
  • Hastelloy B3 Pipe Fittings - ASTM B366
  • Price list for Hastelloy® Alloy B3 pipe fittings
  • Weld fittings made of Hastelloy B3
  • B3 Nickel Alloy Pipe Nipple
  • Eccentric reducer in Hastelloy B3 Sch 10
  • A 3D pipe bend made of Hastelloy B3
  • Long Radius Bend Hastelloy B3
  • Fittings for Seamless Pipe 2.4600
  • Buttweld Fittings 2.4600

Hastelloy B3 Butt weld Fittings Application Industry

  • Oil drilling companies off-shore
  • Generation of electricity
  • The petrochemical industry
  • Processing of gas
  • Chemicals of special interest
  • The pharmaceutical industry
  • Equipment for pharmaceuticals
  • Equipment for Chemicals
  • Equipment for sea water
  • Exchangers of heat
  • The condensers
  • Industry of pulp and paper

Hastelloy B3 Butt weld Fittings Packaging

To ensure that the high quality of a Hastelloy B3 Buttweld Fitting remains intact at the end of the production process and that the fitting is not damaged, Hastelloy Buttweld Fittings are individually wrapped by hand in order to maintain the material's original appearance. As a means of ensuring safe packaging and prompt delivery of the ordered goods, plywood cases or pallet packaging are recommended. It is imperative that Hastelloy B3 Buttweld Fittings be branded with information relevant to the job (e.g., heat number, size, material, and part number) relating to the job. In addition to the Industrial Buttweld Fittings which are delivered, you will also find this information on the box in which your products are packaged.

 

Send Us Message

Got a question? We'd love to hear from you. Send us a message & we'll respond as soon as possible.

Call Us

8080998069 9820584986

Visit Us

 1st Floor, Plot No. 136, Deccan Chambers, JSS Road, Ambewadi, Mumbai 400004