Select Page

Hastelloy C2000 Sheets & Plates

Hastelloy C2000 Sheets & Plates

Stockholders of Hastelloy® C2000 Slit Coils, Manufacturers of Nickel Alloy C2000 Cold Rolled Sheets, JIS NW 6200 Hastelloy® Chequer (Floor) Plates, Hastelloy C2000® Sheet Exporter, C-2000 Hastelloy Coils, Hastelloy® Grade C2000 Shim Sheet Exporters, ASME SB575 Hastelloy Alloy C-2000 Chequered Plates, Hastelloy® C-2000® Perforated Sheets, Hastelloy® C-2000® Sheets, and Hastelloy® C-2000® Alloy Plates in Mumbai

Hastelloy® Flats, Hastelloy® Alloy C-2000 Slotted Hole Sheets, C2000 Hastelloy® Corrosion Resistant Plates Dealers in India, Hastelloy® C2000 Diamond Plate, Nickel Alloy C2000 Strip, Roll Distributors, Hastelloy® C-2000 Coils Dealers, UNS N06200 Hastelloy Hot Rolled Plates Stockists, Type C-2000 Hastelloy Alloy Rings in Mumbai, Hastelloy® C-2000 Coils Dealers

DETAILED INFORMATION

Despite offering a wide range of Hastelloy Alloy C2000 Sheets Plates Coils, MehtaMetals.com offers limited thermal stability and weldability. The Hastelloy C2000 Plates require mechanical ventilation during welding or cutting operations, or both, under certain conditions such as confined spaces, so as to prevent possible exposure to hazardous gases, fumes, or dust. For hot forging, 1232 Degree C (2250 Degree F) is recommended, while for finishing Hastelloy C2000 Coils, 954 Degree C (1750 Degree F) is recommended. The uniqueness of Alloy C2000 Plates lies in their deliberate copper addition, making them unique among nickel-chromium-molybdenum materials. In order to decrease the precipitation of second phase in the heat affected welding zones of Alloy C2000 Coils, high inter-pass temperatures of up to 93 Degree C are recommended. C2000 Nickel Sheets are useful for a wide range of aerospace and high temperature applications due to their good mechanical properties at high temperatures.

In Nickel C2000 Plates, Molybdenum and Copper are combined to provide excellent corrosion resistance to reducing media, while Chromium provides good oxidative resistance. Due to Nickel C2000 Coils' low penetration characteristics, adequate joint access (weld angle) and minimal land are recommended. When engineers design equipment for Hastelloy UNS N06200 Sheets that can withstand the rigorous demands of chemical processing, it is essential that all the individual parts of the machine will hold up over time. 

 As the largest stockiest of Hastelloy Alloy C2000 Plate, we carry an extensive inventory of Hastelloy C2000 Diamond Plate, Hastelloy C2000 Chequered Plate, Hastelloy C2000 Hot Rolled Plate, Hastelloy C2000 Polished Plate, and Hastelloy C2000 Cold Rolled Sheets. Having supplied Hastelloy C2000 plates for more than 19 years, we have developed the skills, resources, and inventory to meet the demanding requirements of a variety of markets. Our expertise allows us to tailor Hastelloy C2000 Strips into any form and for nearly any purpose. We offer Hastelloy C2000 Coils in various sizes at best price, making us one of the best stockholders of C2000 Alloy Plate in India. We have distribution centers in the UK, the USA, Germany, Sweden, and Mexico, as well as a sales and service center network close to our customers worldwide. Known for our commitment to service, we are one of the leading exporters of Hastelloy Alloy C2000 Plates in India. Our C2000 Hastelloy Strips are well known worldwide.

CITIES WE DELIVER

Adoni, Amaravati, Anantapur, Chandragiri, Chittoor, Dowlaiswaram ,Eluru, Guntur, Kadapa, Kakinada, Kurnool, Machilipatnam, Nagarjunakoṇḍa, Rajahmundry, Srikakulam, Tirupati, Vijayawada, Visakhapatnam, Vizianagaram, Yemmiganur, Itanagar, Dhuburi, Dibrugarh, Dispur, Guwahati, Jorhat, Nagaon, Sivasagar, Silchar, Tezpur, Tinsukia, Ara, Barauni, Begusarai, Bettiah, Bhagalpur, Bihar, Sharif, Bodh Gaya, Buxar, Chapra, Darbhanga, Dehri, Dinapur Nizamat, Gaya, Hajipur, Jamalpur, Katihar, Madhubani, Motihari, Munger, Muzaffarpur, Patna, Purnia, Pusa, Saharsa, Samastipur, Sasaram, Sitamarhi, Siwan, Chandigarh, Ambikapur, Bhilai, Bilaspur, Dhamtari, Durg, Jagdalpur, Raipur, Rajnandgaon, Daman, Diu, Silvassa, Delhi, New Delhi, Madgaon, Panaji, Ahmadabad, Amreli, Bharuch, Bhavnagar, Bhuj, Dwarka, Gandhinagar, Godhra, Jamnagar, Junagadh, Kandla, Khambhat, Kheda, Mahesana, Morbi, Nadiad, Navsari, Okha, Palanpur, Patan, Porbandar, Rajkot, Surat, Surendranagar, Valsad, Veraval, Ambala, Bhiwani, Chandigarh, Faridabad, Firozpur Jhirka, Gurugram, Hansi, Hisar, Jind, Kaithal, Karnal, Kurukshetra, Panipat, Pehowa, Rewari, Rohtak, Sirsa, Sonipat, Bilaspur, Chamba, Dalhousie, Dharmshala, Hamirpur, Kangra, Kullu, Mandi, Nahan, Shimla, Una, Anantnag, Baramula, Doda, Gulmarg, Jammu, Kathua, Punch, Rajouri, Srinagar, Udhampur, Bokaro, Chaibasa, Deoghar, Dhanbad, Dumka, Giridih, Hazaribag, Jamshedpur, Jharia, Rajmahal, Ranchi, Saraikela, Badami, Ballari, Bengaluru, Belagavi, Bhadravati, Bidar, Chikkamagaluru, Chitradurga, Davangere, Halebid, Hassan, Hubballi-Dharwad, Kalaburagi, Kolar, Madikeri, Mandya, Mangaluru, Mysuru, Raichur, Shivamogga, Shravanabelagola, Shrirangapattana, Tumakuru, Vijayapura, Alappuzha, Vatakara, Idukki, Kannur, Kochi, Kollam, Kottayam, Kozhikode, Mattancheri, Palakkad, Thalassery, Thiruvananthapuram, Thrissur, Kargil, Leh, Balaghat, Barwani, Betul, Bharhut, Bhind, Bhojpur, Bhopal, Burhanpur, Chhatarpur, Chhindwara, Damoh, Datia, Dewas, Dhar, Dr. Ambedkar Nagar (Mhow), Guna, Gwalior, Hoshangabad, Indore, Itarsi, Jabalpur, Jhabua, Khajuraho, Khandwa, Khargone, Maheshwar, Mandla, Mandsaur, Morena, Murwara, Narsimhapur, Narsinghgarh, Narwar, Neemuch, Nowgong, Orchha, Panna, Raisen, Rajgarh, Ratlam, Rewa, Sagar, Sarangpur, Satna, Sehore, Seoni, Shahdol, Shajapur, Sheopur, Shivpuri, Ujjain, Vidisha, Ahmadnagar, Akola, Amravati, Aurangabad, Bhandara, Bhusawal, Bid, Buldhana, Chandrapur, Daulatabad, Dhule, Jalgaon, Kalyan, Karli, Kolhapur, Mahabaleshwar, Malegaon, Matheran, Mumbai, Nagpur, Nanded, Nashik, Osmanabad, Pandharpur, Parbhani, Pune, Ratnagiri, Sangli, Satara, Sevagram, Solapur, Thane, Ulhasnagar,n Vasai-Virar, Wardha, Yavatmal, Imphal, Cherrapunji, Shillong, Aizawl, Lunglei, Kohima, Mon, Phek, Wokha, Zunheboto, Balangir, Baleshwar, Baripada, Bhubaneshwar, Brahmapur, Cuttack, Dhenkanal, Kendujhar, Konark, Koraput, Paradip, Phulabani, Puri, Sambalpur, Udayagiri, Karaikal, Mahe, Puducherry, Yanam,  Amritsar, Batala, Chandigarh, Faridkot, Firozpur, Gurdaspur, Hoshiarpur, Jalandhar, Kapurthala, Ludhiana, Nabha, Patiala, Rupnagar,  Sangrur, Abu, Ajmer, Alwar, Amer, Barmer, Beawar, Bharatpur, Bhilwara, Bikaner, Bundi, Chittaurgarh, Churu, Dhaulpur, Dungarpur, Ganganagar, Hanumangarh, Jaipur, Jaisalmer, Jalor, Jhalawar, Jhunjhunu, Jodhpur, Kishangarh, Kota, Merta, Nagaur, Nathdwara, Pali, Phalodi, Pushkar, Sawai Madhopur, Shahpura, Sikar, Sirohi, Tonk, Udaipur, Gangtok, Gyalshing, Lachung, Mangan, Arcot, Chengalpattu, Chennai, Chidambaram, Coimbatore, Cuddalore, Dharmapuri, Dindigul, Erode, Kanchipuram, Kanniyakumari, Kodaikanal, Kumbakonam, Madurai, Mamallapuram, Nagappattinam, Nagercoil, Palayamkottai, Pudukkottai, Rajapalayam, Ramanathapuram, Salem, Thanjavur, Tiruchchirappalli, Tirunelveli, Tiruppur, Thoothukudi, Udhagamandalam, Vellore, Hyderabad, Karimnagar, Khammam, Mahbubnagar, Nizamabad, Sangareddi, Warangal, Agartala, Agra, Aligarh, Amroha, Ayodhya, Azamgarh, Bahraich, Ballia, Banda, Bara Banki, Bareilly, Basti, Bijnor, Bithur, Budaun, Bulandshahr, Deoria, Etah, Etawah, Faizabad, Farrukhabad-cum-Fatehgarh, Fatehpur, Fatehpur Sikri, Ghaziabad, Ghazipur, Gonda, Gorakhpur, Hamirpur, Hardoi, Hathras, Jalaun, Jaunpur, Jhansi, Kannauj, Kanpur, Lakhimpur, Lalitpur, Lucknow, Mainpuri, Mathura, Meerut, Mirzapur-Vindhyachal, Moradabad, Muzaffarnagar, Partapgarh, Pilibhit, Prayagraj, Rae Bareli, Rampur, Saharanpur, Sambhal, Shahjahanpur, Sitapur, Sultanpur, Tehri, Varanasi, Almora, Dehra Dun, Haridwar, Mussoorie, Nainital, Pithoragarh, Alipore, Alipur Duar, Asansol, Baharampur, Bally, Balurghat, Bankura, Baranagar, Barasat, Barrackpore, Basirhat, Bhatpara, Bishnupur, Budge Budge, Burdwan, Chandernagore, Darjeeling, Diamond Harbour, Dum Dum, Durgapur, Halisahar, Haora, Hugli, Ingraj Bazar, Jalpaiguri, Kalimpong, Kamarhati, Kanchrapara, Kharagpur, Cooch Behar, Kolkata, Krishnanagar, Malda, Midnapore, Murshidabad, Nabadwip, Palashi, Panihati, Purulia, Raiganj, Santipur, Shantiniketan, Shrirampur, Siliguri, Siuri, Tamluk, Titagarh

Hastelloy C2000 Sheets & Plates Specification

Specifications : ASTM B575 and ASME SB575

Standard : ASTM, ASME, API.

Size : 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm

Thickness : 1.0mm to 200mm

Range : From 5 mm to 50 mm thick in 1000 mm to 1250 mm width and 2500 mm length.

Production : Hot-Rolled (HR) and Cold-Rolled (CR)

Form : Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange), etc.

Grade : UNS (N06200) and DIN (2.4675) Hastelloy C2000 Sheets, Plates & Coils

 

Hastelloy C2000 Sheets & Plates Chemical Composition

Grade

Ni

Mo

Cr

Fe

W

Co

Mn

C

V

P

Si

Hastelloy C2000

Remainder

15.0-17.0

14.5-16.5

4.0-7.0

3.0-4.5

2.5 max

1.0 max

.01 max

.35 max

.04 max

.08 max

Hastelloy C2000 Sheets & Plates Mechanical Properties

 

Grade

Tensile Strength

Yield Strength

Elongation at break

Hastelloy C2000

690 MPa

310 MPa

45%

 

Hastelloy C2000 Sheets & Plates Equivalent Grade

 

STANDARD UNS WNR.
Hastelloy C2000 N06200 2.4675

 

Hastelloy C2000 Sheets & Plates Other Types

C-2000 Hastelloy® sheets, C-2000 Hastelloy® plates, C-2000 Hastelloy® coils, C-2000 Hastelloy® sheets, plates & coils, Hastelloy Alloy C2000 Sheet, Plates & Coils, Hastelloy C-2000 Hot Rolled Plates Dealers in Maharashtra, Hastelloy® Grade C-2000 Sheet Plate & Coil Stockists, ASTM B575 Hastelloy C2000 Shim Sheets Suppliers, Hastelloy C2000 - UNS N06200 Common Trade Names (Hastelloy C-2000®, Hastelloy® C2000, Alloy C2000), Cold Rolled Hastelloy Sheets, Alloy Sheets, Plates, Coils, Hastelloy® C-2000 Slotted Hole Sheets, DIN 2.4675 Hastelloy Flats, Cheap Hastelloy® C2000 Sheets, Plates, C2000 Hastelloy Alloy Chequered Plates, Hastelloy® Alloy C-2000 SB575 Rings Wholesaler in Charni Road, ASME SB575 Nickel Alloy C2000 CR Sheets Manufacturers, Hastelloy C2000 Perforated Sheets, Hastelloy C-2000 Rings Traders in C.P.Tank Road, Hastelloy® Alloy C2000 Corrosion Resistant Plates, Hastelloy C2000 Rolled Floor Plates in Mumbai, Nickel Alloy C2000 JIS NW 6200 Hot Rolled Coils, Hastelloy® Alloy C2000, C-2000 HR Plates, Buy Grade C2000 Hastelloy® Strip, Rolls, Hastelloy C-2000 Foils, Hastelloy C-2000 Slitting Coils, Hastelloy® C-2000 Cold Rolled Coils Exporters in India, Hastelloy® C2000 CR Plates, Hastelloy Alloy C2000 Diamond Plates Stockyards, Manufacturers of ASTM B575 Hastelloy® C-2000 Embossed Sheets, ASME SB575 Hastelloy® C-2000 Perforated Coils, Mumbai, Hastelloy® Alloy C2000 Foils, Hastelloy® Alloy C2000 HR Coils, Hastelloy C-2000 Circles, Hastelloy Alloy C2000 Rings, Hastelloy C2000 Blanks, Hastelloy® Alloy C-2000 Flats, Nickel Alloy C2000 Profile, Hastelloy® Rolls, Hastelloy® Alloy C-2000 B575 Slit Coils, Hastelloy® Hard Tempered Sheets & Coils, Hastelloy® Alloy C-2000 Industrial Coils Exporters in Mumbai India.

 

Hastelloy C2000 Sheets & Plates Types

  1. Hastelloy C2000 2B Sheet
  2. Decorative 8K Mirror Hastelloy C2000 Sheet
  3. Hairline Hastelloy C2000 Sheet
  4. No.4 Hastelloy C2000 Sheet
  5. Hastelloy C2000 Plate
  6. Hastelloy C2000 Sheet
  7. Hastelloy C2000 Coil
  8. Hastelloy C2000 Clad Plate
  9. Hastelloy C2000 Strips
  10. Hastelloy C2000 Shim Stock
  11. Hastelloy C2000 Rolling Sheets
  12. Hastelloy C2000 Flat Sheet
  13. Hastelloy C2000 Rolling Plate
  14. Hastelloy C2000 Flat Shim
  15. Hastelloy C2000 Perforated Plate
  16. Hastelloy C2000 Polished Plate
  17. Hastelloy C2000 cold rolled sheet
  18. Hastelloy C2000 hot rolled plate
  19. Alloy C2000 Plate
  20. Alloy C2000 Sheet
  21. Hastelloy C2000 Quarto Plate
  22. Hastelloy C2000 Precision Strip
  23. Alloy C2000 Cold Rolled Coil, Strip And Sheet
  24. Alloy C2000 Hot Rolled Coil, Strip And Plate

Hastelloy C2000 Sheets & Plates Thermal Conductivity

The temperature at 600 oC is 1.35 1200 oF 53.0 The temperature at 600 oC is 1.35 1200 oF 53.0 The temperature at 600 oC is 1.3 1200 oF 53.0 The temperature at 600 oC is 12.6 400 oF 88 300 oC 14.2 600 oF 99 400 oC 16.1 800 oF 114 500 oC 18.0 1000 oF 133 21.6 1200 oF 16

 

Hastelloy C2000 Sheets & Plates Thermal Diffusivity

Temp, oC cm2/sec Temp, of ft2/hour RT 0.025 RT 0.10 100 oC 0.029 212°F 0.11 200 oC 0.033 392°F 0.13 300 oC 0.036 572°F 0.14 400 oC 0.040 752°F 0.16 500 oC 0.043 932°F 0.17 600 oC 0.047 1112°F 0.18

 

High Temperature Tensile Properties

In oC oF, yield strength, tension, and elongation are measured. 93 oC 200 oF, 319 MPa 46.3 Ksi 724 MPa 105 Ksi 70.3 % 149 oC 300 oF, 308 MPa 44.7 Ksi 684 MPa 99.2 Ksi 68.8 % 204 oC 400 oF, 283 MPa 41 Ksi 676 MPa 98 Ksi 69.3 % 260 oC 500 oF 260 MPa 37.7 Ksi 641 MPa 93 Ksi 67.A temperature of 10%316 oC at 600 degrees Fahrenheit is 35.3MPa at 600 degrees Fahrenheit, 89.3MPa at 616 degrees Fahrenheit, 69.8 % at 700°F. A temperature of 800°F is 216 MPa 31.3 Ksi at 609°F 88.3 oC 73 % 900°F is 2223 oF 32.4 oF 585 oF 84.9 oF 72.6 oC 482 oC 900 oF 900 oF is 223 MPa 32.4 Ksi at 609 oF, 554 MPa 80.3 Ksi at 70.7 %.

 

Fabrication

It is recommended to shape Hastelloy C2000 Sheets & Plates using cold forging because it offers excellent fabrication properties. The high degree of ductility of this alloy allows it to be easily work processed as compared to austenitic stainless steels. As a result of it being stiffer than austenitic stainless steel, more energy is required while cold forging. If specified, wrought Hastelloy C – 2000 is kept in a solution annealed condition. An annealing process that is commonly used is the solution annealing process, which involves heating components up to 1135oC, followed by air or water quenching. The components that are hot forged are solution annealed before final forging, and the welding, forming, and machining properties of C-2000 are similar to those of C-276 alloy. As far as welding the Hastelloy C-series alloys goes, there are basically three different methods.

It is recommended to use GTAW, or gas tungsten arc welding, to weld sheets and plate root passes. For plate welding, a gas metal arc welding method is recommended. Using coated electrodes is the preferred method for shielded metal arc welding in the field. Due to the extensive heating of the primary metal and slow quenching of the weld, the submerged arc welding process is not preferred in the welding industry. In order to decrease the precipitation of second phase in the heat affected welding zones, high interpass temperatures up to 93°C are recommended in order to reduce the precipitation of second phase in these welding zones. Cold treated alloys are not recommended for welding in these processes because they may become sensitized quickly and cause residual stress. It is recommended to quench cold processed alloys after the complete solution annealing prior to welding by water. The grease, oil, and other contaminants must be removed prior to quenching. As a filler metal, Hastelloy C-2000 is the preferred filler metal for tungsten gas arc welding and arc metal welding, while Hastelloy C-2000 electrodes are preferred for shielded metal arc welding.

 

Specific Heat

Temperature, oC Joule/kg.°C Temperature, in BTU per pound.°F RT 428 RT 0.010 100 oC 434 212 of 0.10 200 oC 443 392 of 0.11 300 oC 455 572 of 0.11 400 oC 468 752 of 0.11 500 oC 486 932 of 0.12

Hastelloy C2000 Sheets & Plates Metric Dimensions

 

Surface finish

Thickness (mm)

Width (mm)

2B – Cold rolled, heat treated, pickled, skin passed

0.25–8.0

max. 2032

2D – Cold rolled, heat treated, pickled

0.4–6.35

max. 1524

2E – Cold rolled, heat treated, mechanically descaled

0.4–8.0

max. 2032

2R – Cold rolled, bright annealed

0.25–3.5

max. 1524

2H – Work hardened

0.4–6.35

max. 1524

Polished, brushed

0.5–4.0

max. 1524

Hastelloy C2000 Sheets & Plates Characteristics

Hastelloy C2000 Sheet & Plate manufactured by MehtaMetallals.com comes with additional features and benefits that satisfy the industrial requirements and needs. There are several characteristics of this material, including corrosion resistance, durability, high mechanical strength, and ductility, which ensures it will perform well in both reducing and oxidizing environments.

Hastelloy C2000 Sheets & Plates Application

The applications of Hastelloy C2000 sheets and plates include heat exchangers, chemical processes, aerospace, petrochemicals, reactors, power generation, and high temperature processes. DIN 2.4675 plate offers outstanding resistance to pitting, stress corrosion cracking, and crevice corrosion. 

A wide range of chemical processes can be used on UNS N06200 plate, including ferric acids, brine solutions, seawater, and acetic anhydride, which can be tough oxidizers. In order to prevent exposure to dangerous gases and dust while cutting or welding on N06200 plates, mechanical ventilation is needed. In Hastelloy C2000, copper is added to the nickel-chromium-molybdenum mix to increase corrosion resistance.

 

Send Us Message

Got a question? We'd love to hear from you. Send us a message & we'll respond as soon as possible.

Call Us

8080998069 9820584986

Visit Us

 1st Floor, Plot No. 136, Deccan Chambers, JSS Road, Ambewadi, Mumbai 400004