Select Page

Superalloys, such as Alloy C22 B575 Full-size sheets, are composed of a number of elements which are alloyed in different ways to achieve the desired result. Nickel, chromium, and molybdenum, which are the main alloying constituents of Hastelloy C22 Alloy 2D Plate, are the main components of the alloy. The Nickel Alloy C22 Polished Plate with UNS N06022 or Nickel Alloy C22 Polished Plate is well known for its excellent creep resistance and oxidation resistance. In the same way that other superalloy grades, Hastelloy UNS N06022 Hot Rolled Plates can be used at temperatures above 540°C, Hastelloy UNS N06022 Hot Rolled Plates can be used at high temperatures. As well as being metallurgically stable, the Polish Plate made of Alloy C22 B575 is also considered to be corrosion resistant and metallurgically stable. In order to join Hastelloy C22 B575 Flat Plate, other welding techniques are also possible except submerged arc welding. The Hastelloy Clad Plate SB 575 C22 is one of the alloys that does not become sensitized when heated or welded.

stainless steel SMO 254 pipes

This ASTM B575 standard specifies that Hastelloy C22 plates, sheets, and strips should be made of nickel-based low carbon alloys. It is a low-carbon metal such as Haynes Alloy C22 Shim Stock that includes nickel, chromium, and molybdenum as part of its composition. As part of its ASTM B575 specifications, Hastelloy C22 Grade Strip Tape must meet mechanical and chemical requirements as well. 

There is a requirement within the ASTM B575 specification that the mechanical qualities of the Hastelloy C22 Sheet should meet the requirements for tensile strength, yield strength, elongation, and Rockwell hardness, as well as other mechanical qualities.

There are several providers of Hastelloy C22 plates themselves who recommend using this alloy for applications where corrosion resistance is required, and manufactures and distributes Hastelloy C22 Sheet-Plate-Coil for such applications.

This famous nickel steel alloy boasts exceptional tolerance to a wide range of oxidizing aqueous media, including oxidizing acids containing chlorine ions, nitric acid mixtures, and wet chlorine. It is a standard for low-carbon, nickel-based alloys such as Hastelloy C22 plates, sheets, and strips, and is based on ASTM B575 standard. In addition to being a low-carbon alloy, Haynes Alloy C22 Shim Stock also contains elements such as nickel, chromium, and molybdenum, in addition to its low carbon content.

Hastelloy C22 Grade Strip Tape must meet both chemical and mechanical specifications as specified in ASTM B575. As an example, ASTM B575 specifications are required for mechanical properties of the 2.4602 Hastelloy C22 Sheet, which includes properties such as tensile strength, yield strength, elongation, and Rockwell hardness.

A combination of tungsten, chromium, molybdenum, and iron makes Alloy C22 plates corrosion-resistant in running or stagnant water. In addition to high-performance, corrosion-resistant, and high-temperature grades, Hastelloy Alloy C22 sheets, plates, and coils are available. You can quickly weld Nickel-Chromium-Molybdenum-Tungsten alloy strips as their properties are broken down. All three processes can be used to weld the metal alloy, since it can be welded with gas tungsten arc, shielded metal arc, or gas tungsten arc.

ASTM B575 - Sheet, Plate, and Strips of Hastelloy Alloy


Hastelloy Sheet Plates are covered by ASTM B575 along with UNS N10276 and UNS N06022, respectively. Alloy Sheets are 1/4 inches thick or less, while Alloy Plates are above 1/4 inch thick. Each has a different purpose. There are a number of applications for plates and sheets. The plate is usually used for larger structural parts like boilers, turbines, bridges, and ships, and sheet metal is typically used for cars, trains, aircraft, farm equipment, office equipment, etc. As a matter of fact, the only difference between sheet, plate, and foil is the thickness of the metal. In general, foil has the thinnest thickness and plates have the thickest thickness. Roll-up metals have a thickness between foil and plate and are classified as either foil or plate. A product's thickness determines its classification. Plates are defined as having a thickness of at least 0.25 inches, while sheets are defined as having a thickness of 0.006 inches or more but no more than 0.25 inches. The foil with a thickness of less than 0.006 inches is considered to be at one extreme of this perpetuity.

Hastelloy C22 Sheets & Plates Types

  • Hastelloy C22 Polished Plates
  • Alloy C22 Polished Plates
  • C22 Hastelloy Polished Plates
  • C22 Alloy Polished Plates
  • Hastelloy UNS N06022 Polished Plates
  • Hastelloy WERKSTOFF NR. 2.4602 Polished Plates
  • ASTM / ASME SB575 Hastelloy C22 Polished Plates
  • Hastelloy C22 Hot Rolled Plates
  • Alloy C22 Hot Rolled Plates
  • C22 Hastelloy Hot Rolled Plates
  • C22 Alloy Hot Rolled Plates
  • Hastelloy UNS N06022 Hot Rolled Plates
  • Hastelloy WERKSTOFF NR. 2.4602 Hot Rolled Plates
  • ASME SB575 Alloy C22 Hot Rolled Plates
  • Hastelloy C22 Cold Rolled Plates
  • Alloy C22 Cold Rolled Plates
  • C22 Hastelloy Cold Rolled Plates
  • C22 Alloy Cold Rolled Plates
  • Hastelloy UNS N06022 Cold Rolled Plates
  • Hastelloy WERKSTOFF NR. 2.4602 Cold Rolled Plates
  • ASTM / ASME SB575 Hastelloy C22 Cold Rolled Plates

Hastelloy C22 Plate - What Is It?

SMO 254 Pipes & Tubes

In addition to its strong tolerance to chloride-induced pitting, Hastelloy C22 nickel alloy also has a strong tolerance to stress corrosion and crevice corrosion cracking. The tungsten and molybdenum content of this material makes it resistant to reducing media, while the chromium content makes it resistant to oxidizing media.

It is important to know the qualities of the product-

The sheet & plate made out of Hastelloy C22 has been found to possess many good qualities, which has caused it to become an excellent choice for many tough applications. In addition to its durability, toughness, longevity, tensile strength, flexibility, durability, and flexibility, this product is also highly resistant to general corrosion, pitting, oxidation, stress corrosion cracking, and crevice corrosion.

In The industry conducts many tests to ensure that the product is of the highest quality. They conduct a number of tests, such as positive material identification (PMI), hardness tests, intergranular corrosion tests (IGC), pitting resistance tests, macro tests, micro tests, chemical tests, mechanical tests, flattening tests, flaring tests, etc.