Select Page

Hastelloy C276 Bar, ASTM B574 Hastelloy C276 Round Bars, Hastelloy WERKSTOFF NR. 2.4819 Round Bars , Hastelloy GOST ХН65МВУ Cold Drawn Round Bar, Hastelloy UNS N10276 Bright Bar

Suppliers of ASTM B574 Hastelloy C276 Hex Bar, C276 Hastelloy Alloy Forged Bars Exporter, C276 Alloy Black Bar, ASTM B574 Alloy C276 Threaded Bar, Alloy C276 Square Bar, Hastelloy C276 Hexagonal Bar, Hastelloy Alloy C276 Rods.

DETAILED INFORMATION

Among the benefits of using Hastelloy C276 rods is their excellent corrosion resistance in both oxidizing and reducing environments. Due to its high molybdenum and chromium content, as well as the addition of tungsten, 2.4819 Alloy C 276 is highly resistant to chlorine-induced stress corrosion cracking. Because of these elements in the alloy, the ASTM B574 UNS N10276 alloy can also resist general corrosion, such as pitting and crevice corrosion.

 

The Hastelloy C276 Bar Stock can be used at temperatures up to 1900°F or 1038°C in environments containing oxidative chemicals. As a result of its low chromium content, Hastelloy C276 Round Bar cannot function or provide good resistance in oxidative media such as hot, concentrated nitric acid. As a result of its low carbon content, ASTM B574 N10276 does not precipitate carbide, so it can be used for welding.

 

Despite the fact that alloy C276 Round Bar cannot be hardened by heat treatment, cold working can. The work hardening rate of Hastelloy C276 Hex Bar is higher than that of conventional austenitic stainless steels, so that should be considered. It is easy to weld and process Hastelloy C276 Flat Bar in a shop using standard fabrication methods, just as it is with conventional austenitic stainless steels and nickel-based alloys.

 

When stainless steel, Alloy 400, and Alloy 625 fail under crevice conditions, the Hastelloy C276 Bar performs well in marine environments. For the recovery and processing of sour natural gas containing hydrogen sulfide, carbon dioxide, and chlorides, ASTM B574 N10276 is widely used.

 

Carbon and alloy steels tend to fail due to corrosion cracking or stress cracking caused by sulfur in deep wells due to their corrosive environments. Hastelloy C-276 Round Bars are thick at 2050°F, rapidly quenched with an average Olsen cup depth of 0.48". They can be forged, hot-upset, and impact extruded.

 

In dissimilar welding applications, such as nickel-chromium-molybdenum alloys and stainless steels, C276 alloy bars are used as matching composition fillers.

 

Prior to final fabrication or installation, parts hot-formed in HASTELLOY C-276 alloy Bars should be solution heat-treated whenever possible. During tests, HASTELLOY C-276 alloy Rods showed corrosion rates of less than 5MPY (0.13 mm/y) at temperatures below boiling points and concentrations below 65 wt%. In Alloy C276 Rods, boiling 45% magnesium chloride (ASTM Standard G 36) is often used to test the resistance to this extremely destructive attack.

 

Among the largest exporters and manufacturers of steel and alloy bars in the world is Troinxalloys.com & alloys. By far, this company has proven its worth to its clients and offers its services based on various quality and quantity criteria. This company provides a wide range of Hastelloy C276 Bars to its clients. These bars are available in a variety of sizes and shapes, based on the client's specifications. Hastelloy C276 bars are manufactured using top-quality Hastelloy alloy. These bars are offered to global buyers at reasonable rates, so buying in large quantities is feasible.

 

Nickel, molybdenum, and chromium are used in Hastelloy C276's alloy, which gives it some excellent mechanical properties. In addition to its corrosion resistance, the Hastelloy C276 Round Bar has high formability, ductility, and weldability, just as the other nickel-based alloys do. In chloride environments, it also has increased resistance to stress corrosion cracking. As one of the most versatile products available, the Hastelloy round bar is easy to fabricate using standard techniques.

CITIES WE DELIVER

Adoni, Amaravati, Anantapur, Chandragiri, Chittoor, Dowlaiswaram ,Eluru, Guntur, Kadapa, Kakinada, Kurnool, Machilipatnam, Nagarjunakoṇḍa, Rajahmundry, Srikakulam, Tirupati, Vijayawada, Visakhapatnam, Vizianagaram, Yemmiganur, Itanagar, Dhuburi, Dibrugarh, Dispur, Guwahati, Jorhat, Nagaon, Sivasagar, Silchar, Tezpur, Tinsukia, Ara, Barauni, Begusarai, Bettiah, Bhagalpur, Bihar, Sharif, Bodh Gaya, Buxar, Chapra, Darbhanga, Dehri, Dinapur Nizamat, Gaya, Hajipur, Jamalpur, Katihar, Madhubani, Motihari, Munger, Muzaffarpur, Patna, Purnia, Pusa, Saharsa, Samastipur, Sasaram, Sitamarhi, Siwan, Chandigarh, Ambikapur, Bhilai, Bilaspur, Dhamtari, Durg, Jagdalpur, Raipur, Rajnandgaon, Daman, Diu, Silvassa, Delhi, New Delhi, Madgaon, Panaji, Ahmadabad, Amreli, Bharuch, Bhavnagar, Bhuj, Dwarka, Gandhinagar, Godhra, Jamnagar, Junagadh, Kandla, Khambhat, Kheda, Mahesana, Morbi, Nadiad, Navsari, Okha, Palanpur, Patan, Porbandar, Rajkot, Surat, Surendranagar, Valsad, Veraval, Ambala, Bhiwani, Chandigarh, Faridabad, Firozpur Jhirka, Gurugram, Hansi, Hisar, Jind, Kaithal, Karnal, Kurukshetra, Panipat, Pehowa, Rewari, Rohtak, Sirsa, Sonipat, Bilaspur, Chamba, Dalhousie, Dharmshala, Hamirpur, Kangra, Kullu, Mandi, Nahan, Shimla, Una, Anantnag, Baramula, Doda, Gulmarg, Jammu, Kathua, Punch, Rajouri, Srinagar, Udhampur, Bokaro, Chaibasa, Deoghar, Dhanbad, Dumka, Giridih, Hazaribag, Jamshedpur, Jharia, Rajmahal, Ranchi, Saraikela, Badami, Ballari, Bengaluru, Belagavi, Bhadravati, Bidar, Chikkamagaluru, Chitradurga, Davangere, Halebid, Hassan, Hubballi-Dharwad, Kalaburagi, Kolar, Madikeri, Mandya, Mangaluru, Mysuru, Raichur, Shivamogga, Shravanabelagola, Shrirangapattana, Tumakuru, Vijayapura, Alappuzha, Vatakara, Idukki, Kannur, Kochi, Kollam, Kottayam, Kozhikode, Mattancheri, Palakkad, Thalassery, Thiruvananthapuram, Thrissur, Kargil, Leh, Balaghat, Barwani, Betul, Bharhut, Bhind, Bhojpur, Bhopal, Burhanpur, Chhatarpur, Chhindwara, Damoh, Datia, Dewas, Dhar, Dr. Ambedkar Nagar (Mhow), Guna, Gwalior, Hoshangabad, Indore, Itarsi, Jabalpur, Jhabua, Khajuraho, Khandwa, Khargone, Maheshwar, Mandla, Mandsaur, Morena, Murwara, Narsimhapur, Narsinghgarh, Narwar, Neemuch, Nowgong, Orchha, Panna, Raisen, Rajgarh, Ratlam, Rewa, Sagar, Sarangpur, Satna, Sehore, Seoni, Shahdol, Shajapur, Sheopur, Shivpuri, Ujjain, Vidisha, Ahmadnagar, Akola, Amravati, Aurangabad, Bhandara, Bhusawal, Bid, Buldhana, Chandrapur, Daulatabad, Dhule, Jalgaon, Kalyan, Karli, Kolhapur, Mahabaleshwar, Malegaon, Matheran, Mumbai, Nagpur, Nanded, Nashik, Osmanabad, Pandharpur, Parbhani, Pune, Ratnagiri, Sangli, Satara, Sevagram, Solapur, Thane, Ulhasnagar,n Vasai-Virar, Wardha, Yavatmal, Imphal, Cherrapunji, Shillong, Aizawl, Lunglei, Kohima, Mon, Phek, Wokha, Zunheboto, Balangir, Baleshwar, Baripada, Bhubaneshwar, Brahmapur, Cuttack, Dhenkanal, Kendujhar, Konark, Koraput, Paradip, Phulabani, Puri, Sambalpur, Udayagiri, Karaikal, Mahe, Puducherry, Yanam,  Amritsar, Batala, Chandigarh, Faridkot, Firozpur, Gurdaspur, Hoshiarpur, Jalandhar, Kapurthala, Ludhiana, Nabha, Patiala, Rupnagar,  Sangrur, Abu, Ajmer, Alwar, Amer, Barmer, Beawar, Bharatpur, Bhilwara, Bikaner, Bundi, Chittaurgarh, Churu, Dhaulpur, Dungarpur, Ganganagar, Hanumangarh, Jaipur, Jaisalmer, Jalor, Jhalawar, Jhunjhunu, Jodhpur, Kishangarh, Kota, Merta, Nagaur, Nathdwara, Pali, Phalodi, Pushkar, Sawai Madhopur, Shahpura, Sikar, Sirohi, Tonk, Udaipur, Gangtok, Gyalshing, Lachung, Mangan, Arcot, Chengalpattu, Chennai, Chidambaram, Coimbatore, Cuddalore, Dharmapuri, Dindigul, Erode, Kanchipuram, Kanniyakumari, Kodaikanal, Kumbakonam, Madurai, Mamallapuram, Nagappattinam, Nagercoil, Palayamkottai, Pudukkottai, Rajapalayam, Ramanathapuram, Salem, Thanjavur, Tiruchchirappalli, Tirunelveli, Tiruppur, Thoothukudi, Udhagamandalam, Vellore, Hyderabad, Karimnagar, Khammam, Mahbubnagar, Nizamabad, Sangareddi, Warangal, Agartala, Agra, Aligarh, Amroha, Ayodhya, Azamgarh, Bahraich, Ballia, Banda, Bara Banki, Bareilly, Basti, Bijnor, Bithur, Budaun, Bulandshahr, Deoria, Etah, Etawah, Faizabad, Farrukhabad-cum-Fatehgarh, Fatehpur, Fatehpur Sikri, Ghaziabad, Ghazipur, Gonda, Gorakhpur, Hamirpur, Hardoi, Hathras, Jalaun, Jaunpur, Jhansi, Kannauj, Kanpur, Lakhimpur, Lalitpur, Lucknow, Mainpuri, Mathura, Meerut, Mirzapur-Vindhyachal, Moradabad, Muzaffarnagar, Partapgarh, Pilibhit, Prayagraj, Rae Bareli, Rampur, Saharanpur, Sambhal, Shahjahanpur, Sitapur, Sultanpur, Tehri, Varanasi, Almora, Dehra Dun, Haridwar, Mussoorie, Nainital, Pithoragarh, Alipore, Alipur Duar, Asansol, Baharampur, Bally, Balurghat, Bankura, Baranagar, Barasat, Barrackpore, Basirhat, Bhatpara, Bishnupur, Budge Budge, Burdwan, Chandernagore, Darjeeling, Diamond Harbour, Dum Dum, Durgapur, Halisahar, Haora, Hugli, Ingraj Bazar, Jalpaiguri, Kalimpong, Kamarhati, Kanchrapara, Kharagpur, Cooch Behar, Kolkata, Krishnanagar, Malda, Midnapore, Murshidabad, Nabadwip, Palashi, Panihati, Purulia, Raiganj, Santipur, Shantiniketan, Shrirampur, Siliguri, Siuri, Tamluk, Titagarh

Hastelloy C276 Round Bar Specification

 

Specification

ASTM B574, ASTM B574 UNS N10276, NACE MR-01-75, ASME SB574 Bar Products, AMS 5750 (Hastelloy C, UNS N10002), Inconel C276 (trademark), Werkstoff Nr. 2.4819, ASTM B751, DIN 17744, DIN 17751, DIN 17750 and DIN 17752,VRC276

Grade

Hastelloy C276 – UNS N10276

UNS N10276 Hex Bar size

2-100mm A/F

ASTM B574 Hastelloy C276 Round bar size

Diameter: 3-~C276mm

ASTM B574 Hastelloy C276 Square bar size

4 to 100mm

N10276 Flat bar size

Thickness: 2 -100mm

Width: 10 to 500mm

Hastelloy C276 Rectangles Size

33 x 30mm to 295 x 1066mm

ASTM B574 N10276 Angle bar size

3mm*20mm*20mm~12mm*100mm*100mm

UNS N10276 Section

3.0 to 12.0mm thickness

Hastelloy C276 AMS 5666 Channel Bar

80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness

N10276 Hollow Bar

32mm OD x 16mm ID to 250mm OD x 200mm ID)

ASTM B574 N10276 Billet Size

1/2" to 495mm Diameter

Finish

Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black

Tolerance

H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements

Surface

Hot Rolled Pickled, Bright, Sand Blasting Finished, Cold Drawn, Hairline, Polished

Condition

Hardened & tempered, annealed

Technique

Hastelloy C276 Cold Drawn, Hot Rolled, Forged Round Bar,Cold Rolled, Rod

Processing

Bar cutting to 650mm

Form

Hastelloy C276 Round, Welding Rod, T-Bar, Rod, Precision Ground Bar, Channel Bar, Square, Flat Bar, Blocks, Round Rod, Hollow, Rings, Rectangle, Hex (A/F), Triangle, Threaded, Profiles, Billet, Ingot, I/H Bar, Half Round Bar, Forging, etc.

Our stockyard location for fast delivery across India

Hyderabad, Noida, Shivamogga, Pimpri-Chinchwad, Agra, Coimbatore, Chennai, Tiruchirappalli, Tirunelveli, Bhubaneswar, Mumbai, Pune, Bengaluru, Ahmedabad, Thiruvananthapuram, Dhanbad, Navi Mumbai

Our Hastelloy C276 Round bar conforms to NACE MR0175/ISO 15156

Hastelloy C-276 Chemical Composition

 

(Ni) Nickel

Remainder

(Mo) Molybdenum

15.0 to 17.0

(Cr) Chromium

14.5 to 16.5

(Fe) Iron

4.0 to 7.0

(W) Tungsten

3.0 to 4.5

(Co) Cobalt

2.5 max

(Mn) Manganese

1.0 max

(V) Vanadium

0.35 max

(Si) Silicon

0.08 max

(P) Phosphorus

0.04 max

(S) Sulfur

0.03 max

(C) Carbon

0.010 max

Hastelloy C-276 Mechanical Properties.

Product Form

Tensile (ksi)

.2% Yield (ksi)

Elongation %

Bar

110.0

>

52.6

62

Plate

107.4

50.3

67

Sheet

115.5

54.6

60

Tube & Pipe

105.4

45.4

70

Hastelloy Alloy C276 Bars Equivalent Grades

STANDARD WERKSTOFF NR. UNS GOST AFNOR JIS OR EN
Hastelloy C276 2.4819 N10276 ХН65МВУ - NW 0276 ЭП760 NiMo16Cr15W

Features of Hastelloy C276 round bar:

  • There is a separator between each radius of a U-Bend tube.
  • Plastic strips are used to strap bundles together.
  • To protect against extreme weather, every bundle is covered with plastic.
  • Plastic caps protect the ends of Hastelloy C276 round bars.

Benefits of Hastelloy C276 Bar

  • Alloy C276 bars with precision tolerances
  • Tolerance for close lengths
  • Hollow Hastelloy C276 bars that have been precision straightened
  • Hastelloy C276 Bright Bar with Mirror Finish
  • The packaging of Hastelloy C276 bars is unique
  • SCADA-controlled heat treatment
  • Round bars, hex bars, and square bars are available
  • All major international specifications are met by Nickel C276 Bar
  • Rotating Probe, Ultrasonic / Magnetic Particle Eddy Current testing

C276 Hastelloy Alloy Round Bar Condition

 

H&T

Hardened and tempered.

ANN

Annealed

PH

Precipitation hardened.

Other Types Hastelloy C276 Round Bar

 

Hastelloy C276 Round Bars

Hastelloy C276 Round Rods Supplier

Hastelloy UNS N10276 Bars

Hastelloy Alloy NW NW 0276 Bars Exporter

ASTM B574 C276 Hastelloy Alloy Black Bar Supplier

C276 Hastelloy Polished Bar Distributor

Alloy C276 Bars Supplier

ASME SB574 Hastelloy C276 Bars

UNS N10276 Bar

Hastelloy C276 Black Bars

Hastelloy DIN 2.4819 Round Bars

Hastelloy C276 Forged Bar

C276 Alloy Bars Exporter

Hastelloy C276 Bright Bar

WNR 2.4819 Hex Bars

ISO Certified Hastelloy C276 Round bars

C276 Hastelloy Black Bars

C276 Hastelloy Threaded Bars

Hastelloy Alloy Round Bars Exporter

Hastelloy C276 Rectangle Bar Stockist

Bright Bar Manufacturer

Hex Bars

C276 Hastelloy Round Bar Length

  • Standard length is 9 - 12 meters in the metric system
  • 40 feet in the USA

 

Round Bar
Size Kgs / Foot Kgs / Mtr Size Kgs / Foot Kgs / Mtr Size Kgs / Foot Kgs / Mtr
3mm 0.017 0.055 20mm 0.753 2.470 3" 10.900 35.762
1/8" 0.019 0.062 22mm 0.908 2.979 3-1/4" 12.800 41.996
5/32" 0.029 0.095 7/8" 0.926 3.038 3-1/2" 14.850 48.772
4mm 0.030 0.098 24mm 1.080 3.543 3-3/4" 17.001 55.780
3/16" 0.043 0.141 25mm 1.180 3.871 4" 19.306 63.340
5mm 0.047 0.154 1" 1.210 3.970 4-1/4" 21.908 72.249
7/32" 0.058 0.190 26mm 1.271 4.170 4-1/2" 24.4487 80.340
6mm 0.068 0.223 27mm 1.368 4.490 4-3/4" 27.366 90.249
1/4" 0.076 0.249 1-1/8" 1.534 5.033 5" 30.461 99.940
7mm 0.091 0.298 30mm 1.691 5.548 5-1/2" 36.690 121.000
5/16" 0.118 0.387 1-1/4" 1.924 6.349 6" 43.860 143.900
8mm 0.120 0.398 32mm 1.894 6.314 6-1/2" 51.093 167.630
9mm 0.152 0.498 1-3/8" 2.303 7.550 7" 59.432 196.000
3/8" 0.170 0.557 35mm 2.390 7.553 7-1/2" 68.226 225.000
10mm 0.189 0.620 36mm 2.438 7.999 8" 77.586 254.55
11mm 0.228 0.748 38mm 2.792 8.903 10" 121.048 397.140
7/16" 0.232 0.761 1-1/2" 2.715 8.951      
12mm 0.271 0.889 40mm 3.009 9.872      
1/2" 0.303 0.994 1-5/8" 3.200 10.449      
13mm 0.318 1.043 1-3/4" 3.712 12.179      
14mm 0.368 1.207 45mm 3.807 12.555      
9/16" 0.383 1.256 1-7/8" 4.260 13.977      
15mm 0.424 1.391 48mm 4.330 14.205      
5/8" 0.473 1.551 50mm 4.698 15.414      
16mm 0.481 1.578 2" 4.848 15.906      
17mm 0.543 1.791 2-1/8" 5.475 17.963      
11/16" 0.573 1.880 2-1/4" 6.135 20.128      
18mm 0.610 2.001 60mm 6.768 22.205      
3/4" 0.682 2.237 2-3/8" 6.838 22.435      
      2-1/2" 7.576 24.856      
      2-5/8" 8.354 27.409      
      2-3/4" 9.169 30.083

Size & Dimensions of Hastelloy C276 round bar

Metric

US Bar

ASTM/ Canadian

Japanese

Bar Size

Diam. (mm)

Bar Size

Diam. (Inch)

Bar Size

Diam. (mm2)

Bar Size

Diam. (mm)

5

5

#2

0.250

10M

100

6

6

5.5

5.5

#3

0.375

15M

200

10

10

6

6

#4

0.500

20M

300

13

13

7

7

#5

0.625

25M

500

16

16

8

8

#6

0.750

30M

700

19

19

9

9

#7

0.875

35M

1000

22

22

10

10

#8

1.000

45M

1500

25

25

11

11

#9

1.125

55M

2500

29

29

12

12

#10

1.250

 

 

32

32

14

14

#11

1.375

 

 

35

35

16

16

#12

1.500

 

 

38

38

18

18

#13

1.625

 

 

41

41

20

20

#14

1.750

 

 

44

44

22

22

#15

1.875

 

 

48

48

25

25

#16

2.000

 

 

51

51

28

28

#18

2.250

 

 

57

57

32

32

 

 

 

 

 

 

36

36

 

 

 

 

 

 

40

40

 

 

 

 

 

 

44

44

 

 

 

 

 

 

50

50

 

 

 

 

 

 

Hastelloy C276 round bar suppliers offer a variety of shapes, including round bars, square bars, hexagonal bars, flat bars, channels, hollow bars, and more.

Type

SIZES (mm)

SIZES (Inches)

ISO Tolerance

Hastelloy UNS N10276 Cold Drawn and Polish Round Bar

3.00 – 75.00

1/8" – 3.00"

h8-h9-h10-h11

Alloy C276 Cold Drawn and Ground Bar

10.00 – 75.00

5/6" – 2.50"

h8-h9-h10-h11

C276 Hastelloy Peeled and Polished Round Bar

40.00 – 150.00

1.50" – 6.00"

h11, h11-DIN 1013

Hastelloy Alloy C276 Peeled and Ground Bar

20.00 – 50.00

3/4″ – 2.00"

h9-h10-h11

Hastelloy C276 Round Bar Surface finish

 

CD

Cold drawn

P

Polished

BD

Bright drawn

SRE

Slit rolled edge

CG

Centreless ground

HF

Hot finished

CF

Cold finished

HRAP

Hot rolled annealed and pickled

P&T

Peeled and turned

RT

Rough turned/peeled

ST

Smooth turned

PR

Peeled and reeled

Price Of Hastelloy C276 Round Bar

  • US / Metric Tons of Hastelloy C276 Hot Rolled Round Bars (FOB Price) available upon request
  • Alloy C276 Rods (FOB Price)
  • US / Metric Ton Hastelloy C276 Bars (FOB Price upon request) ASTM B574 Hastelloy C276 Bars
  • On request, Hastelloy C276 Square Bars (FOB Price)
  • Hex bar Hastelloy C276 US / Ton (FOB Price)
  • Hastelloy C276 Round Bars with Cold Finish US/Ton (FOB Price)

Application Industries

  • Construction
  • Bridges
  • Petrochemical Industry
  • Ship Building
  • Engineering
  • General Structural Purposes
  • Offshore and Onshore Services

 

Send Us Message

Got a question? We'd love to hear from you. Send us a message & we'll respond as soon as possible.

Call Us

8080998069 9820584986

Visit Us

 1st Floor, Plot No. 136, Deccan Chambers, JSS Road, Ambewadi, Mumbai 400004