Monel Alloy 400 Sheets, Plates & Coils / UNS N04400 / DIN 2.4360
Table of Content
Monel 400 Plates, Alloy 400 Sheets, Monel Alloy 400 Coils, ASME SB 127 Monel 400 Plate, JIS NW 4400 Plate, Monel UNS N04400 Plates, Monel 400 Circle, 400 Monel Hot Rolled Plates Supplier in Mumbai, India.
Monel Werkstoff No 2.4360 Sheets, 400 Monel Plate Exporter, Monel 400 Cold Rolled Plates, Monel 400 Slatting Coil, ASTM B 127 Monel 400 Shim Sheets, Monel 400 Sheets Dealer in India.
In certain situations, Monel 400 Sheets may be annealed at 926 Degrees C (1700 Degrees F). Stainless Inox exports and trades Monel Alloy 400 Sheets, which may be annealed at 926 Degrees C (1700 Degrees F).
Monel 400 Plates can be relieved of strain when heated to 1000 °F / 1050 °F for 1 to 2 hours. As a result of its high thermal conductivity and purity, Monel 400 Coils allow for lower weld penetration than austenitic stainless steels. In order to obtain minimal distortion after metal removal, Alloy 400 Sheets will reduce stresses without recrystallizing grain structure. It is often used in nuclear fuel plants for the refining of uranium and isotope separation.
In accordance with the ASME Boiler and Pressure Vessel Code, alloy 400 coils are approved for use as building materials. In alkylation units, where concentrated hydrofluoric acid is in contact with the reacting section, our Monel UNS N04400 Sheets are extensively used. These Monel N04400 Plates are exceptionally strong and corrosion-resistant compared to similar metals. These Nickel-Alloy 400 Sheets Plates Coils are well known for their high strength and corrosion resistance. Our Monel Alloy N04400 Coils contain the approximate nickel and copper content that is now formally specified for the alloy.
An alloy based on nickel and copper called Monel 400 is covered by ASTM B127. The specification standard ASTM B127 includes the metal produced in the form of Monel 400 ASTM B127 Hot Rolled Plate, Sheet, and Strip. UNS N04400 is also known as Monel 400 Grade Cold Rolled Plate.
Moreover, Alloy 400 Monel 4mm Thick Plate has excellent corrosion resistance in various media, such as water. Grade Monel 400 Clad Plate is capable of withstanding a wide variety of conditions, including pure water, mineral acids, salts, and different alkali. In addition to being used in marine environments, Monel 400 Alloy Polished Plates can also be used in chemical environments. Since this nickel-based alloy offers good corrosion resistance, excellent weldability, and moderate to high tensile strength, monel 400 plate suppliers in India often recommend it for use in industries such as chemical processing, marine industry, oil refineries, alkylation plants, and nuclear power plants.
As Monel 400 plate suppliers recommend using this material in selective chemical processing plants because it is particularly resistant to hydrochloric acid and hydrofluoric acid when deaerated. UNS N04400 Monel 400 Foil is slightly magnetic at room temperature. The material for Monel 400 Steel Flat Plate must meet the chemistry requirements in addition to mechanical properties specified in ASTM B127, including tensile strength, yield strength, elongation, and Rockwell hardness. In addition, Monel UNS 4400 Sheets must conform to the required grain size.
Additionally, these Monel 400 sheets resist stress corrosion cracking in most freshwaters. Additionally, these Monel 400 sheets resist stress Additionally, these Monel 400 sheets resist stress corrosion cracking in most freshwaters. e alloy, it shows high strength and excellent corrosion resistance in the alkaline atmosphere and is best suitable for diminishing conditions as well.
Monel Alloy 400 Plates are designed using the latest methods for which they possess distinguished properties. Monel Alloy 400 Cold Rolled Plates and Hot Rolled Coils can maintain their strength in brackish water. In addition to being corrosion-resistant in freshwater, our Monel Alloy 400 Chequered Plates and Alloy 400 Polished Plates are also corrosion-resistant in saltwater.
CITIES WE DELIVER
Adoni, Amaravati, Anantapur, Chandragiri, Chittoor, Dowlaiswaram ,Eluru, Guntur, Kadapa, Kakinada, Kurnool, Machilipatnam, Nagarjunakoṇḍa, Rajahmundry, Srikakulam, Tirupati, Vijayawada, Visakhapatnam, Vizianagaram, Yemmiganur, Itanagar, Dhuburi, Dibrugarh, Dispur, Guwahati, Jorhat, Nagaon, Sivasagar, Silchar, Tezpur, Tinsukia, Ara, Barauni, Begusarai, Bettiah, Bhagalpur, Bihar, Sharif, Bodh Gaya, Buxar, Chapra, Darbhanga, Dehri, Dinapur Nizamat, Gaya, Hajipur, Jamalpur, Katihar, Madhubani, Motihari, Munger, Muzaffarpur, Patna, Purnia, Pusa, Saharsa, Samastipur, Sasaram, Sitamarhi, Siwan, Chandigarh, Ambikapur, Bhilai, Bilaspur, Dhamtari, Durg, Jagdalpur, Raipur, Rajnandgaon, Daman, Diu, Silvassa, Delhi, New Delhi, Madgaon, Panaji, Ahmadabad, Amreli, Bharuch, Bhavnagar, Bhuj, Dwarka, Gandhinagar, Godhra, Jamnagar, Junagadh, Kandla, Khambhat, Kheda, Mahesana, Morbi, Nadiad, Navsari, Okha, Palanpur, Patan, Porbandar, Rajkot, Surat, Surendranagar, Valsad, Veraval, Ambala, Bhiwani, Chandigarh, Faridabad, Firozpur Jhirka, Gurugram, Hansi, Hisar, Jind, Kaithal, Karnal, Kurukshetra, Panipat, Pehowa, Rewari, Rohtak, Sirsa, Sonipat, Bilaspur, Chamba, Dalhousie, Dharmshala, Hamirpur, Kangra, Kullu, Mandi, Nahan, Shimla, Una, Anantnag, Baramula, Doda, Gulmarg, Jammu, Kathua, Punch, Rajouri, Srinagar, Udhampur, Bokaro, Chaibasa, Deoghar, Dhanbad, Dumka, Giridih, Hazaribag, Jamshedpur, Jharia, Rajmahal, Ranchi, Saraikela, Badami, Ballari, Bengaluru, Belagavi, Bhadravati, Bidar, Chikkamagaluru, Chitradurga, Davangere, Halebid, Hassan, Hubballi-Dharwad, Kalaburagi, Kolar, Madikeri, Mandya, Mangaluru, Mysuru, Raichur, Shivamogga, Shravanabelagola, Shrirangapattana, Tumakuru, Vijayapura, Alappuzha, Vatakara, Idukki, Kannur, Kochi, Kollam, Kottayam, Kozhikode, Mattancheri, Palakkad, Thalassery, Thiruvananthapuram, Thrissur, Kargil, Leh, Balaghat, Barwani, Betul, Bharhut, Bhind, Bhojpur, Bhopal, Burhanpur, Chhatarpur, Chhindwara, Damoh, Datia, Dewas, Dhar, Dr. Ambedkar Nagar (Mhow), Guna, Gwalior, Hoshangabad, Indore, Itarsi, Jabalpur, Jhabua, Khajuraho, Khandwa, Khargone, Maheshwar, Mandla, Mandsaur, Morena, Murwara, Narsimhapur, Narsinghgarh, Narwar, Neemuch, Nowgong, Orchha, Panna, Raisen, Rajgarh, Ratlam, Rewa, Sagar, Sarangpur, Satna, Sehore, Seoni, Shahdol, Shajapur, Sheopur, Shivpuri, Ujjain, Vidisha, Ahmadnagar, Akola, Amravati, Aurangabad, Bhandara, Bhusawal, Bid, Buldhana, Chandrapur, Daulatabad, Dhule, Jalgaon, Kalyan, Karli, Kolhapur, Mahabaleshwar, Malegaon, Matheran, Mumbai, Nagpur, Nanded, Nashik, Osmanabad, Pandharpur, Parbhani, Pune, Ratnagiri, Sangli, Satara, Sevagram, Solapur, Thane, Ulhasnagar,n Vasai-Virar, Wardha, Yavatmal, Imphal, Cherrapunji, Shillong, Aizawl, Lunglei, Kohima, Mon, Phek, Wokha, Zunheboto, Balangir, Baleshwar, Baripada, Bhubaneshwar, Brahmapur, Cuttack, Dhenkanal, Kendujhar, Konark, Koraput, Paradip, Phulabani, Puri, Sambalpur, Udayagiri, Karaikal, Mahe, Puducherry, Yanam, Amritsar, Batala, Chandigarh, Faridkot, Firozpur, Gurdaspur, Hoshiarpur, Jalandhar, Kapurthala, Ludhiana, Nabha, Patiala, Rupnagar, Sangrur, Abu, Ajmer, Alwar, Amer, Barmer, Beawar, Bharatpur, Bhilwara, Bikaner, Bundi, Chittaurgarh, Churu, Dhaulpur, Dungarpur, Ganganagar, Hanumangarh, Jaipur, Jaisalmer, Jalor, Jhalawar, Jhunjhunu, Jodhpur, Kishangarh, Kota, Merta, Nagaur, Nathdwara, Pali, Phalodi, Pushkar, Sawai Madhopur, Shahpura, Sikar, Sirohi, Tonk, Udaipur, Gangtok, Gyalshing, Lachung, Mangan, Arcot, Chengalpattu, Chennai, Chidambaram, Coimbatore, Cuddalore, Dharmapuri, Dindigul, Erode, Kanchipuram, Kanniyakumari, Kodaikanal, Kumbakonam, Madurai, Mamallapuram, Nagappattinam, Nagercoil, Palayamkottai, Pudukkottai, Rajapalayam, Ramanathapuram, Salem, Thanjavur, Tiruchchirappalli, Tirunelveli, Tiruppur, Thoothukudi, Udhagamandalam, Vellore, Hyderabad, Karimnagar, Khammam, Mahbubnagar, Nizamabad, Sangareddi, Warangal, Agartala, Agra, Aligarh, Amroha, Ayodhya, Azamgarh, Bahraich, Ballia, Banda, Bara Banki, Bareilly, Basti, Bijnor, Bithur, Budaun, Bulandshahr, Deoria, Etah, Etawah, Faizabad, Farrukhabad-cum-Fatehgarh, Fatehpur, Fatehpur Sikri, Ghaziabad, Ghazipur, Gonda, Gorakhpur, Hamirpur, Hardoi, Hathras, Jalaun, Jaunpur, Jhansi, Kannauj, Kanpur, Lakhimpur, Lalitpur, Lucknow, Mainpuri, Mathura, Meerut, Mirzapur-Vindhyachal, Moradabad, Muzaffarnagar, Partapgarh, Pilibhit, Prayagraj, Rae Bareli, Rampur, Saharanpur, Sambhal, Shahjahanpur, Sitapur, Sultanpur, Tehri, Varanasi, Almora, Dehra Dun, Haridwar, Mussoorie, Nainital, Pithoragarh, Alipore, Alipur Duar, Asansol, Baharampur, Bally, Balurghat, Bankura, Baranagar, Barasat, Barrackpore, Basirhat, Bhatpara, Bishnupur, Budge Budge, Burdwan, Chandernagore, Darjeeling, Diamond Harbour, Dum Dum, Durgapur, Halisahar, Haora, Hugli, Ingraj Bazar, Jalpaiguri, Kalimpong, Kamarhati, Kanchrapara, Kharagpur, Cooch Behar, Kolkata, Krishnanagar, Malda, Midnapore, Murshidabad, Nabadwip, Palashi, Panihati, Purulia, Raiganj, Santipur, Shantiniketan, Shrirampur, Siliguri, Siuri, Tamluk, Titagarh
Specification Of Monel Alloy 400 Sheets
Specifications : ASTM B127 / ASME SB127
Dimensions: ASTM, ASME, and API
Size : 15NB to 150NB In
Thickness: from 2 to 40 mm
Production: Hot-Rolled (HR) / Cold-Rolled (CR)
Grade : Monel 400 / K500 UNS (N04400, N05500), DIN (2.4360, 2.4375)
Form: Coils, Foils, Rolls, Plain sheets, Shim Sheets, Perforated Sheets, Chequered Plates, Strips, Flats, Blank (Circle), Ring (Flange), etc.
Chemical Composition Of Monel Alloy 400 Sheets
|Monel 400||0.30 max||2.00 max||0.50 max||0.024 max||28.00 – 34.00||2.50 max||63.00 min|
|Monel K500||0.25 max||1.5 max||0.5 max||0.010 max||27.00 – 33.00||0.5 – 2||63.00 min|
Monel Alloy 400 Sheets Mechanical Properties
|Element||Density||Melting Point||Tensile Strength||Yield Strength (0.2%Offset)||Elongation|
|Monel 400||8.8 g/cm3||1350 °C (2460 °F)||Psi – 80,000 , MPa – 550||Psi – 35,000 , MPa – 240||40 %|
|Monel K500||8.44 g/cm3||1350 °C (2460 °F)||Psi – 160000 , MPa – 1100||Psi – 115000 , MPa – 790||20 %|
Equivalent Grades Of Monel Alloy 400 Sheets
|Monel 400||N04400||2.4360||NW 4400||NA 13||МНЖМц 28-2,5-1,5||NU-30M||NiCu30Fe|
About Monel Alloy 400 Sheets
Monel 400 polished plates, Monel UNS N04400 polished plates, WERKSTOFF NR 24360 polished plates, and ASTM Monel 400 polished plates are just a few examples. Among the equivalent grades of Monel 400 sheet plates are WERKSTOFF NR.- 24360, UNS- N04400, BS- NA 13, GOST- 28-2.5-1.5, ARNOR- NU-30M, JIS- NW 4400, and EN- Nicu30Fe. These plates, sheets, and coils are used in off-shore oil, heat exchangers, and chemical industries. They hold standard certificates such as EN 1020431 and NACE MR 01075. A radiography test, a hardness test, and a mechanical test must be conducted on the material.
We are certificated plates and sheets with widespread ranges. Some industries use fabricated material because of its quality features. The fabricated material is used in piping systems. Monel K-500 and Monel 400 are grades of the material with standards such as ASTM, API, and ASME. They are available in coils, plain sheets, chequered plates, blanks, and shim sheets. The size is 15-150 NB In and the thickness is between 0.1 and 12mm.
Widest Stock Of Monel Alloy 400 Sheets
- Monel 400 Industrial Sheets Plates, Coils
- Monel Alloy 400 Plate
- ASTM B564 400 Monel Perforated Sheets
- ASME SB564 400 Monel Alloy Coils
- 400 Nickel Alloy Polish Coils
- Monel 400 Alloy Sheets Manufacturer
- Monel 400 Shim Coils
- UNS N04400 Plates
- Alloy 400 Coils Supplier
- Large Selection of Monel 400 Sheets / Plates Coils
- UNS N04400 Sheets
- 2.4360 Coils
- 400 Monel Matt PVC Sheets
- 2.4360 Plates and Sheets
- Monel Alloy 400 Coils
- 400 Monel Custom Length Plates
- Monel 400 Alloy 2B Finish Sheets Stock
- Custom Nickel Alloy 400 Coils
- 400 Monel High-Quality Plates
- Monel 400 Sheets Plate Cut To Size
- ASTM B564 400 Monel Strips
- Monel Alloy 400 BA Finish Plates
- Alloy 400 Sheets / Plates #4 Finish
- 400 Nickel Alloy NO.8 Plates
- AISI 400 Monel Chequered Plate
- Grade 400 Monel Alloy Coils
Application Of Monel Alloy 400 Sheets
- Oil & Gas Industry
- Chemical Industry
- Power Plants Industry
- Nuclear Plants Industry
- Ship Building Industry
- Paper & Pulp Industry
Send Us Message
Got a question? We'd love to hear from you. Send us a message & we'll respond as soon as possible.
1st Floor, Plot No. 136, Deccan Chambers, JSS Road, Ambewadi, Mumbai 400004