Select Page

Asme SA 240 309 Stainless Steel Plates, ASTM A240 Stainless Steel 309 Plates, SS 309 Plates Exporter In India, SS 309 Plates, Stainless Steel 309 Plates Exporterer In Mumbai, 1.4828 Plate, SS 1.4833 Sheets, Stainless Steel 309 CR Plates, SUS 309 Plates, Stainless Steel 309 Industrial Sheets Exporterers And Suppliers In Mumbai, India.

Plates Exporters In Dammam, SS UNS S30908 Plates, SS 309 Hot Rolled Plates, SS S30900 Plates, Austenitic Stainless Steel 309S Plates, Stainless Steel 309 Coils Supplier In Riyadh, TP309S Stainless Steel Plate, 309 SS Perforated Plate, TP 309S Stainless Steel Chequered Plate Dealer In Jeddah, Stainless Steel Shim Plates, SS 309, 309S Plates, Stainless Steel 309S Plate Exporter In India 

DETAILED INFORMATION

Stainless Steel 309 Plates are produced by the biggest exporter, supplier, and exporter in the world, the MehtaMetals.com, which is a leader in its fields. Based on national and international quality standards, we Exportere these sheets and plates in different surface finishes, end finishes, dimensions, shapes, sizes, specifications, and thicknesses and provide them to clients in cut-made specifications as per their expectations according to the specifications they request. It should be noted that among the types of plates and sheets available are polished plates, hot-rolled plates, cold-rolled plates, shim sheets, and chequered plates.

The stainless steel 309 Plates are an austenitic steel that demonstrates outstanding resistance to oxidation and corrosion, is strong at high temperatures, and is also resistant to creeping damage. These plates can be easily fabricated and machined. Due to the lower nickel content in SS 309 plates, they resist sulfur attack at high temperatures and are more resistant to corrosion. There are many benefits to using stainless steel 309 plates, and they are very tough and ductile, making them easy to machine and fabricate. It is important to mention that Stainless Steel 309 Plates are more corrosion resistant than Stainless Steel 304 Plates in addition to being more strong.

 There are two main procedures for hot working stainless steel UNS S30900 Plates. First, they are hot worked at 1177 degrees Celsius (2150 degrees Fahrenheit), then they are reheated at 982 degrees Celsius (1800 degrees Fahrenheit), and lastly, they are quenched rapidly. Corrosion resistance can be restored through post-work annealing after the work has been completed.

This steel does not require any preheating before use. A temperature of 150°C should not be exceeded during the interpass. It is normally not necessary to heat treat the weld after the welding process has been completed. As compared to non-alloyed steels, austenitic steels have a thermal conductivity of only 30% of that of non-alloyed steels. Since austenitic steels have a lower melting point than non-alloyed steels, austenitic steels require a lower input of heat to weld than non-alloyed steels, as their fusion point is lower. Welding speeds must be increased in order to avoid overheating of thinner sheets or burn-through during welding to avoid these two problems.

For faster heat rejection, copper back-up plates are functional, however, surface-fusing the copper back-up plates is not allowed in order to prevent cracks in the solder metal, which causes the solder to melt. As compared with non-alloyed steels, this steel has a significantly higher coefficient of thermal expansion than non-alloyed steels. Due to the low thermal conductivity, it is necessary to apply a greater amount of distortion in order to compensate. In order to prevent distortions when welding 1.4828, all procedures, which work against this distortion, have to be respected. 

These procedures include the back-step sequence welding, welding alternately on opposite sides with double-V butt welds, and assigning two welders when the components are accordingly large. Whenever the product thickness exceeds 12mm, a double-V butt weld is preferred instead of a single-V butt weld, in order to prevent the product from warping. It is recommended to include an angle of between 60° and 70° when welding, about 50° is sufficient when using MIG-welding. Weld seams should not be accumulated over the course of the welding process. There is a need for the tack welds to be affixed with relatively shorter distances between them (significantly shorter than those of non-alloyed steels) in order to prevent strong deformation, shrinking or flaking of the tack welds caused by corrosion.

There should be a grinding process in the future in order to remove any crater cracks from the tacks. In case of austenitic weld metal and excessive heat input, the tendency to form heat cracks exists when the heat input is too high. Using weld metal that contains a lower percentage of ferrite (delta ferrite) can limit the tendency towards heat cracks that arise from the welding process. Up to 10% of ferrite content in a steel has a favorable effect and doesn't significantly affect the corrosion resistance of the steel in general. As thin a layer as possible should be welded (stringer bead technique) so that a higher cooling speed will reduce the addiction to hot cracks that occur as a result of hot welding.

To prevent the vulnerability to intergranular corrosion and embrittlement, it is highly recommended that the welding process is carried out with a preferably fast cooling process. Welding with laser beams is a very suitable application for 1.4828. It is not necessary to use filler metals as long as the groove width of the welding groove is less than 0.3mm respectively, 0.1mm product thickness.

In terms of quality and features, Stainless Steel 309 Plates are an excellent choice for welding and forming applications since they are a lower carbon version of grade 309. The materials can easily be welded using any kind of resistance or fusion welding method. It is recommended that Stainless Steel UNS S30900 Sheets be used in applications that are susceptible to sensitization and corrosion as a result of high-temperature gases or condensates that are present during shutdown. In addition to boiler baffles, furnace components, oven linings, fire box sheets, and other high temperature containers, stainless steel 309 plates can also be used for boiler baffles and furnace components. Among the properties of these sheets and plates include their high tensile strength, high toughness, ductility, durability, and stability at high temperatures, among others. We make sure to provide our clients with a number of test certificates in accordance with EN 10204/3.1B in order to make sure that the products that they purchase are damage-free. These certificates include 100% radiography test reports, third-party test reports, raw material certificates, etc.

CITIES WE DELIVER

Adoni, Amaravati, Anantapur, Chandragiri, Chittoor, Dowlaiswaram ,Eluru, Guntur, Kadapa, Kakinada, Kurnool, Machilipatnam, Nagarjunakoṇḍa, Rajahmundry, Srikakulam, Tirupati, Vijayawada, Visakhapatnam, Vizianagaram, Yemmiganur, Itanagar, Dhuburi, Dibrugarh, Dispur, Guwahati, Jorhat, Nagaon, Sivasagar, Silchar, Tezpur, Tinsukia, Ara, Barauni, Begusarai, Bettiah, Bhagalpur, Bihar, Sharif, Bodh Gaya, Buxar, Chapra, Darbhanga, Dehri, Dinapur Nizamat, Gaya, Hajipur, Jamalpur, Katihar, Madhubani, Motihari, Munger, Muzaffarpur, Patna, Purnia, Pusa, Saharsa, Samastipur, Sasaram, Sitamarhi, Siwan, Chandigarh, Ambikapur, Bhilai, Bilaspur, Dhamtari, Durg, Jagdalpur, Raipur, Rajnandgaon, Daman, Diu, Silvassa, Delhi, New Delhi, Madgaon, Panaji, Ahmadabad, Amreli, Bharuch, Bhavnagar, Bhuj, Dwarka, Gandhinagar, Godhra, Jamnagar, Junagadh, Kandla, Khambhat, Kheda, Mahesana, Morbi, Nadiad, Navsari, Okha, Palanpur, Patan, Porbandar, Rajkot, Surat, Surendranagar, Valsad, Veraval, Ambala, Bhiwani, Chandigarh, Faridabad, Firozpur Jhirka, Gurugram, Hansi, Hisar, Jind, Kaithal, Karnal, Kurukshetra, Panipat, Pehowa, Rewari, Rohtak, Sirsa, Sonipat, Bilaspur, Chamba, Dalhousie, Dharmshala, Hamirpur, Kangra, Kullu, Mandi, Nahan, Shimla, Una, Anantnag, Baramula, Doda, Gulmarg, Jammu, Kathua, Punch, Rajouri, Srinagar, Udhampur, Bokaro, Chaibasa, Deoghar, Dhanbad, Dumka, Giridih, Hazaribag, Jamshedpur, Jharia, Rajmahal, Ranchi, Saraikela, Badami, Ballari, Bengaluru, Belagavi, Bhadravati, Bidar, Chikkamagaluru, Chitradurga, Davangere, Halebid, Hassan, Hubballi-Dharwad, Kalaburagi, Kolar, Madikeri, Mandya, Mangaluru, Mysuru, Raichur, Shivamogga, Shravanabelagola, Shrirangapattana, Tumakuru, Vijayapura, Alappuzha, Vatakara, Idukki, Kannur, Kochi, Kollam, Kottayam, Kozhikode, Mattancheri, Palakkad, Thalassery, Thiruvananthapuram, Thrissur, Kargil, Leh, Balaghat, Barwani, Betul, Bharhut, Bhind, Bhojpur, Bhopal, Burhanpur, Chhatarpur, Chhindwara, Damoh, Datia, Dewas, Dhar, Dr. Ambedkar Nagar (Mhow), Guna, Gwalior, Hoshangabad, Indore, Itarsi, Jabalpur, Jhabua, Khajuraho, Khandwa, Khargone, Maheshwar, Mandla, Mandsaur, Morena, Murwara, Narsimhapur, Narsinghgarh, Narwar, Neemuch, Nowgong, Orchha, Panna, Raisen, Rajgarh, Ratlam, Rewa, Sagar, Sarangpur, Satna, Sehore, Seoni, Shahdol, Shajapur, Sheopur, Shivpuri, Ujjain, Vidisha, Ahmadnagar, Akola, Amravati, Aurangabad, Bhandara, Bhusawal, Bid, Buldhana, Chandrapur, Daulatabad, Dhule, Jalgaon, Kalyan, Karli, Kolhapur, Mahabaleshwar, Malegaon, Matheran, Mumbai, Nagpur, Nanded, Nashik, Osmanabad, Pandharpur, Parbhani, Pune, Ratnagiri, Sangli, Satara, Sevagram, Solapur, Thane, Ulhasnagar,n Vasai-Virar, Wardha, Yavatmal, Imphal, Cherrapunji, Shillong, Aizawl, Lunglei, Kohima, Mon, Phek, Wokha, Zunheboto, Balangir, Baleshwar, Baripada, Bhubaneshwar, Brahmapur, Cuttack, Dhenkanal, Kendujhar, Konark, Koraput, Paradip, Phulabani, Puri, Sambalpur, Udayagiri, Karaikal, Mahe, Puducherry, Yanam,  Amritsar, Batala, Chandigarh, Faridkot, Firozpur, Gurdaspur, Hoshiarpur, Jalandhar, Kapurthala, Ludhiana, Nabha, Patiala, Rupnagar,  Sangrur, Abu, Ajmer, Alwar, Amer, Barmer, Beawar, Bharatpur, Bhilwara, Bikaner, Bundi, Chittaurgarh, Churu, Dhaulpur, Dungarpur, Ganganagar, Hanumangarh, Jaipur, Jaisalmer, Jalor, Jhalawar, Jhunjhunu, Jodhpur, Kishangarh, Kota, Merta, Nagaur, Nathdwara, Pali, Phalodi, Pushkar, Sawai Madhopur, Shahpura, Sikar, Sirohi, Tonk, Udaipur, Gangtok, Gyalshing, Lachung, Mangan, Arcot, Chengalpattu, Chennai, Chidambaram, Coimbatore, Cuddalore, Dharmapuri, Dindigul, Erode, Kanchipuram, Kanniyakumari, Kodaikanal, Kumbakonam, Madurai, Mamallapuram, Nagappattinam, Nagercoil, Palayamkottai, Pudukkottai, Rajapalayam, Ramanathapuram, Salem, Thanjavur, Tiruchchirappalli, Tirunelveli, Tiruppur, Thoothukudi, Udhagamandalam, Vellore, Hyderabad, Karimnagar, Khammam, Mahbubnagar, Nizamabad, Sangareddi, Warangal, Agartala, Agra, Aligarh, Amroha, Ayodhya, Azamgarh, Bahraich, Ballia, Banda, Bara Banki, Bareilly, Basti, Bijnor, Bithur, Budaun, Bulandshahr, Deoria, Etah, Etawah, Faizabad, Farrukhabad-cum-Fatehgarh, Fatehpur, Fatehpur Sikri, Ghaziabad, Ghazipur, Gonda, Gorakhpur, Hamirpur, Hardoi, Hathras, Jalaun, Jaunpur, Jhansi, Kannauj, Kanpur, Lakhimpur, Lalitpur, Lucknow, Mainpuri, Mathura, Meerut, Mirzapur-Vindhyachal, Moradabad, Muzaffarnagar, Partapgarh, Pilibhit, Prayagraj, Rae Bareli, Rampur, Saharanpur, Sambhal, Shahjahanpur, Sitapur, Sultanpur, Tehri, Varanasi, Almora, Dehra Dun, Haridwar, Mussoorie, Nainital, Pithoragarh, Alipore, Alipur Duar, Asansol, Baharampur, Bally, Balurghat, Bankura, Baranagar, Barasat, Barrackpore, Basirhat, Bhatpara, Bishnupur, Budge Budge, Burdwan, Chandernagore, Darjeeling, Diamond Harbour, Dum Dum, Durgapur, Halisahar, Haora, Hugli, Ingraj Bazar, Jalpaiguri, Kalimpong, Kamarhati, Kanchrapara, Kharagpur, Cooch Behar, Kolkata, Krishnanagar, Malda, Midnapore, Murshidabad, Nabadwip, Palashi, Panihati, Purulia, Raiganj, Santipur, Shantiniketan, Shrirampur, Siliguri, Siuri, Tamluk, Titagarh

Stainless Steel 309/309l/309h Plate Specifications

Standard ASTM, ASME, BS, DIN, EN
Material 310S, 310, 309, 309S, 316, 316L, 316Ti, 317, 317L, 321, 321H, 347, 347H, 304, 304L,
302, 301, 201, 202, 403, 405, 409, 409L, 410, 410S, 420, 430, 631, 904L, Duplex, etc
Specification

Cold rolled: 1219mm * 2438mm (4′ x 8′), 1219mm * 3048mm (4′ x 10′), 1220mm * 2440mm, 1250mm * 2500mm or as your requirement.

Hot rolled: 1500mm * 2000mm, 1000mm * 3000mm, 1500mm * 4000mm, 1500m * 6000mm or as your requirement.

Technique Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Form Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Etc.
Surface 2B, 2D, BA, NO. 1, NO. 4, NO.8, 8K, Mirror, Chequered, Embossed, Hair Line, Sand Blast, Brush, Etching
Thickness 0.25-200mm, 0.3mm to 120mm
Width 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm
Length 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, 12000mm
Package Standard Export Seaworthy Package, or as required.
Value Added Services Cladding,Heat Treatment,Annealed, Pickling, Polish,Rolling,Cutting,Bending,Forging,Minor Fabrication Etc.
MTC Mill Test Certificate, Available as per EN 10204 3.1

Stainless Steel 309/309l/309h Plate Chemical Composition

Element Content (%)
Iron, Fe 60
Chromium, Cr 23
Nickel, Ni 14
Manganese, Mn 2
Silicon, Si 1
Carbon, C 0.20
Phosphorous, P 0.045
Sulphur, S 0.030

Stainless Steel 309/309l/309h Plate Mechanical Properties

Properties Metric Imperial Elongation (% in 50mm) min Hardness
Tensile strength 620 MPa 89900 psi Rockwell B (HR B) max Brinell (HB) max
Yield strength (@ strain 0.200%) 310 MPa 45000 psi 40
Izod impact 120 – 165 J 88.5 – 122 ft-lb
Shear modulus (typical for steel) 77 GPa 11200 ksi
Elastic modulus 200 GPa 29008 ksi
Poisson’s ratio 0.27-0.30 0.27-0.30
Elongation at break (in 50 mm) 45% 45%
Hardness, Brinell 147 147
Hardness, Rockwell B 85 85
Hardness, Vickers (converted from Rockwell B hardness) 169 169

 

Stainless Steel 309/309l/309h Plate Physical Properties

Properties Metric Imperial Elongation (% in 50mm) min Hardness
Density 8 g/cm3 0.289 lb/in³ Rockwell B (HR B) max Brinell (HB) max
Melting point 1455°C 2650°F 40
Izod impact 120 – 165 J 88.5 – 122 ft-lb
Shear modulus (typical for steel) 77 GPa 11200 ksi
Elastic modulus 200 GPa 29008 ksi
Poisson’s ratio 0.27-0.30 0.27-0.30
Elongation at break (in 50 mm) 45% 45%
Hardness, Brinell 147 147
Hardness, Rockwell B 85 85
Hardness, Vickers (converted from Rockwell B hardness) 169 169

 

Stainless Steel 309/309l/309h Plate Equivalent Grades

ASTM A167

ASME SA249

ASTM A314

ASTM A580

ASTM A249

ASME SA312

ASTM A358

FED QQ-S-763

ASTM A276

ASME SA358

ASTM A403

FED QQ-S-766

ASTM A473

ASME SA403

ASTM A409

MIL-S-862

ASTM A479

ASME SA409

ASTM A511

SAE J405 (30309)

DIN 1.4828

ASTM A312

ASTM A554

SAE 30309

Stainless Steel 309/309l/309h Plate Weight Chart

Size (mm)

Weight per

plate (Kg)

Size(mm)

Weight per

plate (Kg)

4000 x 2000 x 2.0

136.0

3000 x 1500 x 5.0

191.0

4000 x 2000 x 3.0

204.0

4000 x 2000 x 5.0

340.0

2500 x 1250 x 4.0

106.0

2500 x 1250 x 6.0

159.0

3000 x 1500 x 4.0

153.0

3000 x 1500 x 6.0

230.0

4000 x 2000 x 4.0

272.0

4000 x 2000 x 6.0

408.0

2500 x 1250 x 5.0

133.0

Stainless Steel 309/309l/309h Plate Sizes

Sizes in mm

Availability

0.4

0.5

0.8

1

1.2

1.6

2

3

4

5

6

8

10

12

16

20

25

Stainless Steel 309/309l/309h Plate Other Types

SS 309 Perforated Sheets

Stainless Steel 309 Perforated Sheets, UNS S30900 Perforated Sheets, DIN 1.4828 / 1.4307 Perforated Sheets, ASME SA 240 SS 310S Perforated Sheets, Stainless Steel S31000 Perforated Sheets

SS 309 Chequered Plates

ASME SA240 SS 309 Chequered Plates, ASTM A240 Stainless Steel 310 Chequered Plates, DIN 1.4845 Chequered Plates, UNS S31008 Chequered Plates, SS 309/310/310S Chequered Plates

SS 309 Shim Sheets

Stainless Steel ASTM A240 309/310/310S Shim Sheets, UNS S31000 / DIN 1.4828 Shim Sheets, ASME SA240 SS 309/310/310S Shim Sheets, SS 309/310 Shim Sheet, Stainless 310S Shim Sheets, SS 309/310/310S Shim Sheets Supplier

SS 309 Coils

DIN 1.4307 Coils, UNS S30900 Coils, ASME SA 240 Stainless Steel 309/310/310S Coils, ASTM A240 309/310/310S SS Coils

SS 309 Strips

ASTM A240 309/310/310S Stainless Steel Strips, SS UNS S31000 Strips, Stainless Steel 309/310/310S Strips, SS 1.4845 Strips

SS 309 Foils

UNS S31008 Foils, Stainless Steel 309/310/310S Foils, ASTM A240 309 Stainless Steel Foils, Stainless 310S Foils, Stainless Steel 310 Foils

 

Testing Detail-

Following their Exportere, these plates are subjected to a number of tests to ensure quality and service. These tests are carried out according to the established standards of Mehta Metals

  • Corrosion tests between grains
  • Positive results from material identification tests
  • Micro- and macro-level tests
  • Flare and flattery tests
  • Hardness tests
  • Tensile strength tests
  • Mechanics and chemistry tests
  • Third-party inspection

Packaging 

The packaging of our products is of particular concern to us.

Our products are packed in a variety of ways depending on the product. We pack our products in a variety of ways, such as:

  • The package is shrink-wrapped
  • 2. Packing cartons
  • 3. Pallets made of wood
  • 4. Wooden boxes
  • 5. A wooden crate

Stainless Steel 309/309l/309h Plate Application Industries

There are numerous applications and industries that use our Stainless Steel 309 Plates. Some of them are listed below:

  • Petrochemical Industry
  • Oil and Gas Industry
  • Chemical Industry
  • Power Plant Industry
  • Energy Industry
  • Pharmaceuticals Industry
  • Pulp & Paper Industry
  • Food Processing Industry
  • Aerospace Industry
  • Refining Industry

 

Send Us Message

Got a question? We'd love to hear from you. Send us a message & we'll respond as soon as possible.

Call Us

8080998069 9820584986

Visit Us

 1st Floor, Plot No. 136, Deccan Chambers, JSS Road, Ambewadi, Mumbai 400004