Select Page

Stainless Steel 317/317L/317H Fittings

image

Stainless Steel 317 Forged Fittings, 317L Stainless Steel Forged Fittings, SS 317L Threaded Fittings, UNS S31700 Forged Fittings, Stainless Steel 317 Socket weld Fittings, 317 SS High-Pressure Forged Fittings, 1.4449, 1.4438 Forged Fittings, SS 317L Socket weld Fittings, UNS S31703 Forged Fittings, Stainless Steel 317 Threaded Fittings Manufacturer in Mumbai, India.

317L SS Forged Socket weld Fittings Stockist, Grade 317 SS Threaded Fittings Dealer, Buy Stainless Steel UNS S31700 Full Coupling, SS 317L Forged Cap, INOX 1.4449 Threaded Nipple Wholesaler, ASME SA182 F317L Forged Bushing, ANSI B16.11 317L SS Forged Plugs, SUS 317 Forged Union, F317 SS Half Coupling, 317L SS Welding Boss, 317 Stainless Steel Industrial Forged Fittings Supplier in Mumbai, India.

DETAILED INFORMATION

There is a difference between the high carbon alloy 317 and the low carbon alloy 317L pipe fittings. It has the ability to be used in applications where maximum corrosion resistance is required and where it is not likely to anneal behind welding, since austenitic chromium-nickel stainless steel cannot anneal behind welding. With intermittent repair to 1600°F and continuous service to 1700°F, the material offers good corrosion resistance over a wide temperature range. In comparison to the common chromium-nickel alloys like SS304 and SS316L, SS 317 is an austenitic alloy that contains molybdenum and is more resistant to chemical attacks than those chromium-nickel alloys.

Furthermore, 317 is also capable of providing greater strength levels at higher temperatures, such as higher creep, stress-to-rupture, and tensile strength.

The alloy 317L is austenitic stainless steel with low carbon content that provides better corrosion resistance than the alloys 304L and 316L due to its austenitic nature. In view of the lower percentage of carbon in SS 317L, it is less susceptible to sensitization during welds and other thermal procedures as a result of less carbon content. While alloy 317L may not be magnetic in the annealed environment, it is possible for the magnetic characteristics to return once it is welded.

As opposed to austenitic chromium-nickel-molybdenum stainless steel which is prone to carbon corrosion, alloy 317L (UNS S31703) exhibits low carbon corrosion. This combination of high levels of these elements gives the alloy the ability to resist corrosion and chloride pitting better than the conventional grades of 304/304L and 316/316L, due to the high levels of these elements. As opposed to 316L, the alloy offers better resistance to corrosion in highly corrosive environments that contain sulfurous media, chlorides, and other halides.

Because of the low carbon content in Alloy 317L, it is possible to weld it without intergranular corrosion occurring due to the precipitation of chromium carbide inside the weld, which allows it to be used in its as-welded form. It is possible to turn the alloy into the dual expert of Alloy 317 (UNS S31700) with the addition of nitrogen as an increasing agent. There is no magnetic property in the annealed condition of alloy 317L. In spite of the fact that it cannot be hardened by heat up treatment, the material will solidify if it is subjected to cold working conditions. The alloy 317L can be easily welded and processed using standard fabrication practices that are used in most shops.

The higher molybdenum content of SS 317/317L Pipe Fittings assures superior corrosion resistance in mainly media, when compared with other stainless steel grades, thanks to its superior corrosion resistance. The 317L stainless steel is usually uncorroded by environments that do not bother certain stainless steels. Nitric acid, on the other hand, is one of the few powerfully oxidizing acids that do not cause chemical reactions. Molybdenum alloys are generally not as good at making metals in these environments as alloys that do not have molybdenum.

CITIES WE DELIVER

Adoni, Amaravati, Anantapur, Chandragiri, Chittoor, Dowlaiswaram ,Eluru, Guntur, Kadapa, Kakinada, Kurnool, Machilipatnam, Nagarjunakoṇḍa, Rajahmundry, Srikakulam, Tirupati, Vijayawada, Visakhapatnam, Vizianagaram, Yemmiganur, Itanagar, Dhuburi, Dibrugarh, Dispur, Guwahati, Jorhat, Nagaon, Sivasagar, Silchar, Tezpur, Tinsukia, Ara, Barauni, Begusarai, Bettiah, Bhagalpur, Bihar, Sharif, Bodh Gaya, Buxar, Chapra, Darbhanga, Dehri, Dinapur Nizamat, Gaya, Hajipur, Jamalpur, Katihar, Madhubani, Motihari, Munger, Muzaffarpur, Patna, Purnia, Pusa, Saharsa, Samastipur, Sasaram, Sitamarhi, Siwan, Chandigarh, Ambikapur, Bhilai, Bilaspur, Dhamtari, Durg, Jagdalpur, Raipur, Rajnandgaon, Daman, Diu, Silvassa, Delhi, New Delhi, Madgaon, Panaji, Ahmadabad, Amreli, Bharuch, Bhavnagar, Bhuj, Dwarka, Gandhinagar, Godhra, Jamnagar, Junagadh, Kandla, Khambhat, Kheda, Mahesana, Morbi, Nadiad, Navsari, Okha, Palanpur, Patan, Porbandar, Rajkot, Surat, Surendranagar, Valsad, Veraval, Ambala, Bhiwani, Chandigarh, Faridabad, Firozpur Jhirka, Gurugram, Hansi, Hisar, Jind, Kaithal, Karnal, Kurukshetra, Panipat, Pehowa, Rewari, Rohtak, Sirsa, Sonipat, Bilaspur, Chamba, Dalhousie, Dharmshala, Hamirpur, Kangra, Kullu, Mandi, Nahan, Shimla, Una, Anantnag, Baramula, Doda, Gulmarg, Jammu, Kathua, Punch, Rajouri, Srinagar, Udhampur, Bokaro, Chaibasa, Deoghar, Dhanbad, Dumka, Giridih, Hazaribag, Jamshedpur, Jharia, Rajmahal, Ranchi, Saraikela, Badami, Ballari, Bengaluru, Belagavi, Bhadravati, Bidar, Chikkamagaluru, Chitradurga, Davangere, Halebid, Hassan, Hubballi-Dharwad, Kalaburagi, Kolar, Madikeri, Mandya, Mangaluru, Mysuru, Raichur, Shivamogga, Shravanabelagola, Shrirangapattana, Tumakuru, Vijayapura, Alappuzha, Vatakara, Idukki, Kannur, Kochi, Kollam, Kottayam, Kozhikode, Mattancheri, Palakkad, Thalassery, Thiruvananthapuram, Thrissur, Kargil, Leh, Balaghat, Barwani, Betul, Bharhut, Bhind, Bhojpur, Bhopal, Burhanpur, Chhatarpur, Chhindwara, Damoh, Datia, Dewas, Dhar, Dr. Ambedkar Nagar (Mhow), Guna, Gwalior, Hoshangabad, Indore, Itarsi, Jabalpur, Jhabua, Khajuraho, Khandwa, Khargone, Maheshwar, Mandla, Mandsaur, Morena, Murwara, Narsimhapur, Narsinghgarh, Narwar, Neemuch, Nowgong, Orchha, Panna, Raisen, Rajgarh, Ratlam, Rewa, Sagar, Sarangpur, Satna, Sehore, Seoni, Shahdol, Shajapur, Sheopur, Shivpuri, Ujjain, Vidisha, Ahmadnagar, Akola, Amravati, Aurangabad, Bhandara, Bhusawal, Bid, Buldhana, Chandrapur, Daulatabad, Dhule, Jalgaon, Kalyan, Karli, Kolhapur, Mahabaleshwar, Malegaon, Matheran, Mumbai, Nagpur, Nanded, Nashik, Osmanabad, Pandharpur, Parbhani, Pune, Ratnagiri, Sangli, Satara, Sevagram, Solapur, Thane, Ulhasnagar,n Vasai-Virar, Wardha, Yavatmal, Imphal, Cherrapunji, Shillong, Aizawl, Lunglei, Kohima, Mon, Phek, Wokha, Zunheboto, Balangir, Baleshwar, Baripada, Bhubaneshwar, Brahmapur, Cuttack, Dhenkanal, Kendujhar, Konark, Koraput, Paradip, Phulabani, Puri, Sambalpur, Udayagiri, Karaikal, Mahe, Puducherry, Yanam,  Amritsar, Batala, Chandigarh, Faridkot, Firozpur, Gurdaspur, Hoshiarpur, Jalandhar, Kapurthala, Ludhiana, Nabha, Patiala, Rupnagar,  Sangrur, Abu, Ajmer, Alwar, Amer, Barmer, Beawar, Bharatpur, Bhilwara, Bikaner, Bundi, Chittaurgarh, Churu, Dhaulpur, Dungarpur, Ganganagar, Hanumangarh, Jaipur, Jaisalmer, Jalor, Jhalawar, Jhunjhunu, Jodhpur, Kishangarh, Kota, Merta, Nagaur, Nathdwara, Pali, Phalodi, Pushkar, Sawai Madhopur, Shahpura, Sikar, Sirohi, Tonk, Udaipur, Gangtok, Gyalshing, Lachung, Mangan, Arcot, Chengalpattu, Chennai, Chidambaram, Coimbatore, Cuddalore, Dharmapuri, Dindigul, Erode, Kanchipuram, Kanniyakumari, Kodaikanal, Kumbakonam, Madurai, Mamallapuram, Nagappattinam, Nagercoil, Palayamkottai, Pudukkottai, Rajapalayam, Ramanathapuram, Salem, Thanjavur, Tiruchchirappalli, Tirunelveli, Tiruppur, Thoothukudi, Udhagamandalam, Vellore, Hyderabad, Karimnagar, Khammam, Mahbubnagar, Nizamabad, Sangareddi, Warangal, Agartala, Agra, Aligarh, Amroha, Ayodhya, Azamgarh, Bahraich, Ballia, Banda, Bara Banki, Bareilly, Basti, Bijnor, Bithur, Budaun, Bulandshahr, Deoria, Etah, Etawah, Faizabad, Farrukhabad-cum-Fatehgarh, Fatehpur, Fatehpur Sikri, Ghaziabad, Ghazipur, Gonda, Gorakhpur, Hamirpur, Hardoi, Hathras, Jalaun, Jaunpur, Jhansi, Kannauj, Kanpur, Lakhimpur, Lalitpur, Lucknow, Mainpuri, Mathura, Meerut, Mirzapur-Vindhyachal, Moradabad, Muzaffarnagar, Partapgarh, Pilibhit, Prayagraj, Rae Bareli, Rampur, Saharanpur, Sambhal, Shahjahanpur, Sitapur, Sultanpur, Tehri, Varanasi, Almora, Dehra Dun, Haridwar, Mussoorie, Nainital, Pithoragarh, Alipore, Alipur Duar, Asansol, Baharampur, Bally, Balurghat, Bankura, Baranagar, Barasat, Barrackpore, Basirhat, Bhatpara, Bishnupur, Budge Budge, Burdwan, Chandernagore, Darjeeling, Diamond Harbour, Dum Dum, Durgapur, Halisahar, Haora, Hugli, Ingraj Bazar, Jalpaiguri, Kalimpong, Kamarhati, Kanchrapara, Kharagpur, Cooch Behar, Kolkata, Krishnanagar, Malda, Midnapore, Murshidabad, Nabadwip, Palashi, Panihati, Purulia, Raiganj, Santipur, Shantiniketan, Shrirampur, Siliguri, Siuri, Tamluk, Titagarh

Stainless Steel 317/317L/317H Fittings Specification

317 / 317L Forged Fittings Specifications ASTM A182/ ASME SA182
317 / 317L SS Forged Fittings size 1/8” NB to 4” NB (Socketweld & Screwed-Threaded)
SS 317 / 317L Forged Fittings Dimensions ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Stainless Steel 317 / 317L Forged Fittings Types Socketweld Fittings, Screwed-Threaded Fittings
ASTM A182 F317 / 317L Stainless Steel Forged Fittings Pressure Rating

Threaded End-2000lb/ 3000lb/ 6000lbs

Socket-weld End-3000/ 6000/ 9000lbs

Stainless Steel 317 / 317L Forged Fittings Thread NPT, BSPT, BSPP
317 / 317L Stainless Steel Forged Fittings Test Certificates

EN 10204/3.1B

Raw Materials Certificate

100% Radiography Test Report

Third Party Inspection Report, etc

SS 317 / 317L Forged Fittings Origin & Mills Japanese, Indian, USA, Korean, European, Ukraine, Russian
Specialized manufacturer of 90º Elbows, 45º Elbows, Tees, Cross, Couplings, Reducers, Inserts, Caps, Nipples, and Unions, Forged Pipe Fittings, Socket Weld & Threaded, Equal Tees & Reducing Tees, 90° & 45° Elbows, Plugs

Chemical Composition Of Stainless Steel 317/317L/317H Fittings

Grade C Mn Si P S Cr Mo Ni Fe
SS 317 0.08 max 2.0 max 1.0 max 0.045 max 0.030 max 18.00 - 20.00 3.00 - 4.00 11.00 - 15.00 57.845 min
SS 317L 0.035 max 2.0 max 1.0 max 0.045 max 0.030 max 18.00 - 20.00 3.00 - 4.00 11.00 - 15.00 57.89 min
SS 321 0.08 max 2.0 max 1.0 max 0.045 max 0.030 max 17.00 - 19.00 - 9.00 - 12.00 -
SS 321H 0.04 – 0.10 2.0 max 1.0 max 0.045 max 0.030 max 17.00 - 19.00 - 9.00 – 12.00 -

Mechanical Properties of Stainless Steel 317/317L/317H Fittings

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation S Cr Mo Ni Fe
7.9 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 % 0.030 max 18.00 - 20.00 3.00 - 4.00 11.00 - 15.00 57.845 min
7.9 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 % 0.030 max 18.00 - 20.00 3.00 - 4.00 11.00 - 15.00 57.89 min
SS 321 0.08 max 2.0 max 1.0 max 0.045 max 0.030 max 17.00 - 19.00 - 9.00 - 12.00 -
SS 321H 0.04 – 0.10 2.0 max 1.0 max 0.045 max 0.030 max 17.00 - 19.00 - 9.00 – 12.00 -

Equivalent Grades Of Stainless Steel 317/317L/317H Fittings

STANDARD WERKSTOFF NR. UNS JIS EN
SS 317 1.4449 S31700 SUS 317 -
SS 317L 1.4438 S31703 SUS 317L X2CrNiMo18-15-4
SS 321 1.4541 S32100 SUS 321 X6CrNiTi18-10
SS 321H 1.4878 S32109 SUS 321H X12CrNiTi18-9

Manufacturing Standards of Stainless Steel 317/317L/317H Fittings

ASTM A182 / A182M

Forged Fittings and valves and parts for high temperature service.

Standard Specification for Wrought Austenitic Stainless Steel Forged Fittings

BS21

Threading.

BS3799

Specification for Steel pipe fittings, screwed and Socket-welding for the petroleum industry

ANSI B16.11

Forged steel fittings socket-welding and threaded.

Socket Welding and Threaded Forged Fittings

ANSI/ASME B1.20.1

Pipe threads, general purpose (inch).

ISO 4144

Stainless steel fittings threaded to ISO 7-1.

MSS SP-95

Swage(d) Nipples and Bull Plugs

Stainless Steel 317/317L/317H Fittings Forms & Availability

Products

Size

ASTM A182 SS F317 / 317L 90° Elbow

ASTM A182 SS F317 / 317L 45° Elbow

Sizes 1/8″– 4″

Pressure Ratings –

2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS

ASTM A182 SS F317 / 317L Forged Tee

ASTM A182 SS F317 / 317L Union

ASTM A182 SS F317 / 317L Forged Cross

ASTM A182 SS F317 / 317L Insert

ASTM A182 SS F317 / 317L Screwed Bushing

ASTM A182 SS F317 / 317L Threaded Pipe Nipple

ASTM A182 SS F317 / 317L Forged Socket weld Cap

ASTM A182 SS F317 / 317L Screwed Coupling

ASTM A182 SS F317 / 317L Forged Plug

ASTM A182 SS F317 / 317L Street Elbow

Stainless Steel 317/317L/317H Fittings Price Per Kg (As Per Demand And Manufacturer):

Stainless Steel 317 Fittings type

Stainless Steel 317 Fittings Price in India

Stainless Steel 317 Fittings Price in Saudi Riyal

Stainless Steel 317 Fittings Price in UAE Dirham

Stainless Steel 317 REDUCER- ECCENTRIC BUTTWELD, ASME B16.9 price per kg

INR 5,575

SAR 293.57 Saudi Riyal

AED 295.31 UAE Dirham

Stainless Steel 317 Fittings price per kg

INR 5,574

SAR 293.52 Saudi Riyal

AED 295.26 UAE Dirham

Stainless Steel 317 ELBOW-45 DEGREE BUTTWELD, ASME B16.9 price per kg

INR 5,545

SAR 292.00 Saudi Riyal

AED 293.72 UAE Dirham

Stainless Steel 317 ELBOW-90 DEGREE BUTTWELD, ASME B16.9 price per kg

INR 5,582

SAR 293.94 Saudi Riyal

AED 295.68 UAE Dirham

 

Dimensions Of Stainless Steel 317/317L/317H Fittings

ASME b16.9 Fittings

Normal Pipe Size

ANSI b16 9 Pipe Fitting O

D Y

Wall Thickness T

(Pipe Elbow Sch.)

LR 45 Deg Elbows Centre to Face B

SR 45 Deg Elbows

Weight

LR 90 Deg Elbows Centre to Face A LR 90 Deg Elbows Weight In Below SR 90 Deg Elbows Centre to Face A SR 90 Deg Elbows Weight In Below
millimeter inch. millimeter millimeter Schedule millimeter kilogram millimeter kilogram millimeter kilogram
15 1/2” 21.3 2.78 STD 15.9 0.04 38.1 0.08
      3.73 X.S 15.9 0.05 38.1 0.10
20 3/4” 26.7 2.87 STD 11.1 0.04 28.6 0.08
      3.91 X.S 11.1 0.05 28.6 0.11
25 1” 33.4 3.38 STD 22.2 0.09 38.1 0.15 25.4 0.11
      4.55 X.S 22.2 0.11 38.1 0.19 25.4 0.14
32 11/4” 42.2 3.56 STD 25.4 0.14 47.6 0.28 31.75 0.18
      4.85 X.S 25.4 0.2 47.6 0.39 31.75 0.24
40 11/2” 48.3 3.68 STD 28.6 0.2 57.1 0.4 38.1 0.26
      5.08 X.S 28.6 0.25 57.1 0.5 38.1 0.35
50 2” 60.3 3.91 STD 34.9 0.36 76.2 0.72 50.8 0.5
      5.54 X.S 34.9 0.5 76.2 1.0 50.8 0.68
65 21/2” 73.0 5.16 STD 44.4 0.73 95.2 1.46 63.5 0.95
      7.01 X.S 44.4 0.91 95.2 1.82 63.5 1.27
80 3” 88.9 5.49 STD 50.8 1.1 114.3 2.18 76.2 1.45
      7.62 X.S 50.8 1.45 114.3 2.86 76.2 1.95
100 4” 114.3 6.02 STD 63.5 2.1 152.4 4.2 101.6 2.8
      8.56 X.S 63.5 2.9 152.4 5.7 101.6 3.9
125 5” 141.3 6.65 STD 79.4 3.4 190.0 6.8 127.0 4.8
      9.5 X.S 79.4 5.0 190.0 10.0 127.0 6.5
150 6” 168.3 7.11 STD 95.2 5.1 229.0 10.1 152.4 6.8
      10.97 X.S 95.2 7.7 229.0 15.3 152.4 10.2
200 8” 219.1 8.18 STD 127.0 10.2 305.0 20.4 203.0 13.6
      12.7 X.S 127.0 15.5 305.0 30.9 203.0 20.9
250 10” 273.9 9.27 STD 159.0 18.1 381.0 36.1 254.0 24.1
      12.7 X.S 159.0 24.4 381.0 48.8 254.0 32.5
300 12” 323.9 9.52 STD 190.0 26.6 457.0 53.1 305.0 35.4
      12.7 X.S 190.0 35.0 457.0 70.0 305.0 46.7
350 14” 355.6 9.52 STD 222.0 34.1 533.0 68.1 356.0 45.4
      12.7 X.S 222.0 45.0 533.0 90.0 356.0 60.0
400 16” 406.4 9.52 STD 254.0 45.0 610.0 89.3 406.0 59.5
      12.7 X.S 254.0 59.0 610.0 118.0 406.0 78.7
450 18” 457.0 9.52 STD 286.0 56.5 686.0 113.0 457.0 75.6
      12.7 X.S 286.0 75.0 686.0 150.0 457.0 100.0
500 20” 508.0 9.52 STD 318.0 85.0 762.0 140.0 508.0 93.5
      12.7 X.S 318.0 112.5 762.0 186.0 508.0 124.0
600 24” 610.00 9.52 STD 381.0 101.5 914.0 203.0 610.0 135.0
      12.7 X.S 381.0 134.5 914.0 269.0 610.0 179.0

Size Of Stainless Steel 317/317L/317H Fitting

NPS

(inch)

Pipe Schedule.

OD

(inch)

Wall

Thick.

(in)

Temperature

Duplex Steel 100 Fitting

Duplex Steel 200 Fitting

Duplex Steel 300 Fitting

Duplex Steel 400 Fitting

Duplex Steel 500 Fitting

Allowable Stress 

16700

16700

16700

15500

14400

1"

40

1.315

0.133

2205

2205

2205

2047

1902

80

1.315

0.179

3061

3061

3061

2841

2640

160

1.315

0.250

4493

4493

4493

4170

3874

1 1/2"

40

1.900

0.145

1629

1629

1629

1512

1404

80

1.900

0.200

2303

2303

2303

2138

1986

160

1.900

0.281

3362

3362

3362

3120

2899

2"

40

2.375

0.154

1371

1371

1371

1272

1182

80

2.375

0.218

1985

1985

1985

1843

1712

160

2.375

0.344

3283

3283

3283

3047

2831

3"

40

3.500

0.216

1301

1301

1301

1208

1122

80

3.500

0.300

1844

1844

1844

1712

1590

160

3.500

0.438

2787

2787

2787

2587

2403

4"

40

4.500

0.237

1102

1102

1102

1023

950

80

4.500

0.337

1596

1596

1596

1482

1377

160

4.500

0.531

2611

2611

2611

2424

2552

5"

40

5.563

0.258

965

965

965

896

832

80

5.563

0.375

1428

1428

1428

1325

1231

160

5.563

0.625

2474

2474

2474

2296

2133

6"

40

6.625

0.280

877

877

877

814

756

80

6.625

0.432

1379

1379

1379

1280

1189

160

6.625

0.719

2382

2382

2382

2211

2054

8"

40

8.625

0.322

771

771

771

716

665

80

8.625

0.500

1218

1218

1218

1131

1050

160

8.625

0.906

2298

2298

2298

2133

1982

10"

40

10.750

0.365

699

699

699

649

603

80

10.750

0.594

1159

1159

1159

1075

999

160

10.750

1.125

2289

2289

2289

2124

1974

Available Stock Of Stainless Steel 317/317L/317H Fittings

Products

UNS

DIN

Stainless Steel 317 Forged Elbow

Stainless Steel 317L Forged Elbow

Stainless Steel 321 Forged Elbow

Stainless Steel 321H Forged Elbow

UNS S31700 Forged Elbow

UNS S31703 Forged Elbow

UNS S32100 Forged Elbow

UNS S32109 Forged Elbow

1.4449 Forged Elbow

1.4438 Forged Elbow

1.4541 Forged Elbow

1.4878 Forged Elbow

Stainless Steel 317 Forged Tee

Stainless Steel 317L Forged Tee

Stainless Steel 321 Forged Tee

Stainless Steel 321H Forged Tee

UNS S31700 Forged Tee

UNS S31703 Forged Tee

UNS S32100 Forged Tee

UNS S32109 Forged Tee

1.4449 Forged Tee

1.4438 Elbow

1.4541 Elbow

1.4878 Forged Tee

Stainless Steel 317 Forged Cross

Stainless Steel 317L Forged Cross

Stainless Steel 321 Forged Cross

Stainless Steel 321H Forged Cross

UNS S31700 Forged Cross

UNS S31703 Forged Cross

UNS S32100 Forged Cross

UNS S32109 Elbow

1.4449 Forged Cross

1.4438 Forged Cross

1.4541 Forged Cross

1.4878 Forged Cross

Stainless Steel 317 Forged Coupling

Stainless Steel 317L Forged Coupling

Stainless Steel 321 Forged Coupling

Stainless Steel 321H Forged Coupling

UNS S31700 Forged Coupling

UNS S31703 Forged Coupling

UNS S32100 Forged Coupling

UNS S32109 Forged Coupling

1.4449 Forged Coupling

1.4438 Forged Coupling

1.4541 Forged Coupling

1.4878 Forged Coupling

Stainless Steel 317 Forged Union

Stainless Steel 317L Forged Union

Stainless Steel 321 Forged Union

Stainless Steel 321H Forged Union

UNS S31700 Forged Union

UNS S31703 Forged Union

UNS S32100 Forged Union

UNS S32109 Forged Union

1.4449 Forged Union

1.4438 Forged Union

1.4541 Forged Union

1.4878 Forged Union

Testings (Destructive, Non Destructive) Of Stainless Steel 317/317L/317H Fittings

  • Positive Material Identification - PMI Testing
  • Chemical Analysis - Spectro Analysis
  • Mechanical Testing Such as Tensile, Elongation, Reduction of Area
  • Micro Test
  • Macro Test
  • Hardness Test
  • Pitting Resistance Test
  • Intergranular Corrosion (IGC) Test
  • Flaring Test
  • Flattening Test
  • Hydrostatic Test
  • Hydrogen-Induced Cracking (HIC) Test, NACE TM0284
  • Sulfide Stress Corrosion Cracking (SSC), NACE TM 0177
  • Radiography Test
  • Dye Penetrant Test (DP Test)
  • Ultra Sonic Test (UT)
  • Eddy Current Testing
  • Impact Test
  • Bend Test

Packing Of Stainless Steel 317/317L/317H Fittings

We Mehta Metals.com Ensure the best quality of Packing, because its play important role especially in a case of international shipments in which consignment pass through various channels to reach the ultimate destination, so we put extraordinary concern regarding packaging.

We pack our goods in numerous ways based on the products. We pack our products in multiple ways, such as:--

    • Boxes and Crates
    • Shrink-wrapped
    • Carton boxes
    • Wooden pallets
    • Wooden boxes
    • Wooden crates

Application Of Stainless Steel 317/317L/317H Fittings

  • Chemical tanks
  • Pulp & Paper Industries
  • Petrochemical Industries
  • Power Generation Industries
  • Oil & Gas Industries
  • Desalination
  • Architecture and Construction
  • Food Processing Equipment
  • Biofuels plant
  • Cargo tanks for ships and trucks
  • Chemical Industries Pumps, fans, centrifuges, sulphur melting coils,
  • Digester in sulphate and sulfite plants, blow tanks, blow lines

Send Us Message

Got a question? We'd love to hear from you. Send us a message & we'll respond as soon as possible.

Call Us

8080998069 9820584986

Visit Us

 1st Floor, Plot No. 136, Deccan Chambers, JSS Road, Ambewadi, Mumbai 400004