Select Page

UNS N04400 / DIN 2.4360 / Monel 400 Alloy Round Bars & Rods

Monel 400 Alloy Round Bars

Monel Alloy 400 Bright Bars Suppliers, Alloy 400 Round Bar Dealer, ASME SB164 Monel 400 Round Bars Suppliers, ASTM B164 Monel Alloy 400 Round Bars Dealers, UNS N04400 Rods Stockists, Alloy 400 Round Bar Supplier in India

Monel Round Bar Suppliers At Discounted Prices, Buy Large Or Small Quantity From ASTM B164 UNS N04400 Monel Hex Bar, Monel 400 Rod, Monel 400 Bar Stock At Low Prices In Mumbai India, Monel 400 Welding Rod, We Have A Huge Selection Of Monel 400 Flat Bar & Hex Bar

DETAILED INFORMATION

There are several characteristics of Monel 400 round bars, including their excellent resistance to seawater and steam at high temperatures, their excellent resistance to rapidly flowing brackish water, and their excellent resistance to stress corrosion cracking in most freshwaters. Additionally, Monel 400 alloy is exceptionally resistant to deaerated halogen-based acids such as hydrogen chloride and hydrofluoric acid, as well as neutral and alkaline salts.

In typical environments, Alloy 400 is virtually immune to chloride-related ion stress corrosion cracking. Monel 400 has excellent corrosion resistance in reductive environments, but it is considered poor in oxidative environments. Nitric acid or nitrous acid is both oxidative acids that are not suitable for Monel 400 round bars. 

Alloy 400 is also attacked by sulfur-bearing gases at temperatures over 700°F, and molten sulfur attacks it at temperatures over 500°F.

Despite subzero temperatures, Monel 400 Rod has excellent mechanical properties. The material withstands temperatures up to 1000°F. It melts between 2370°F and 2460°F due to its high melting point. Since alloy 400 is a low-strength material when annealed, tempering techniques can be used to increase its tensile strength.

Due to its superior ability to yield good results after machining, Monel 400 Bar Stock is also considered cost-effective because it has about the same corrosion resistance as plain nickel. 

Industrial heat exchangers, marine engineering, crude petroleum stills, crude oil distillation towers, boiler feed water heaters, other heat exchangers, de-aerating heaters, chlorine solvents, gasoline tanks, and chemical and hydrocarbon processing equipment are among the uses of Monel 400 round bars. Gas-tungsten, gas-metal, or shielded metal arcs can easily be used to weld Monel 400.

 Additionally, filler metals should be used. Even though post-weld heat treatment is not required, the alloy must be cleaned thoroughly after welding to ensure maximum corrosion resistance. Monel 400 is hard to machine and tends to work hard like most nickel-based alloys. With the right tooling and machining techniques, it can be very effective.

In the absence of cleaning post-welding, contamination and embrittlement could occur. With the right amount of control over hot or cold working and with the right thermal treatment, Monel 400 can have a wide range of enhanced mechanical properties.

There is no doubt that Monel 400 Rod has excellent mechanical properties at subzero temperatures. The alloy is suitable for temperatures up to 1000° F and has a melting point between 2370° F and 2460° F. A variety of tempering techniques can be used to increase the tensile strength of alloy 400 since it has low strength when annealed.

While Monel 400 Bar Stock usually offers corrosion resistance similar to plain nickel, its maximum working pressure and temperature can be quite high. Additionally, the alloy is considered cost-effective because it is able to produce excellent results when machined. 

Monel 400 Forged Bars are commonly used in industrial heat exchangers, marine engineering, crude petroleum stills, crude oil distillation towers, boiler feed water heaters, other heat exchangers, de-aerating heaters, chlorine-containing solvents, gasoline and fresh water tanks, chemical, and hydrocarbon processing equipment.

With Monel 400, it is easy to weld either with a gas-tungsten arc, a gas-metal arc, or a shielded metal arc. Additionally, the alloy needs to be processed using appropriate filler metals. Although post-weld heat treatment is not necessary, the alloy must be cleaned thoroughly after welding. Cleaning post-welding is crucial for optimum

Therefore, contamination and embrittlement are at risk. It is possible to enhance the mechanical properties of fabricated Monel 400 by adjusting the hot and cold working process and selecting the appropriate thermal treatments. Like most nickel-based alloys, Monel 400 is hard to machine and works hard. When the right tools and machining techniques are used, the alloy can produce excellent results.

CITIES WE DELIVER

Adoni, Amaravati, Anantapur, Chandragiri, Chittoor, Dowlaiswaram ,Eluru, Guntur, Kadapa, Kakinada, Kurnool, Machilipatnam, Nagarjunakoṇḍa, Rajahmundry, Srikakulam, Tirupati, Vijayawada, Visakhapatnam, Vizianagaram, Yemmiganur, Itanagar, Dhuburi, Dibrugarh, Dispur, Guwahati, Jorhat, Nagaon, Sivasagar, Silchar, Tezpur, Tinsukia, Ara, Barauni, Begusarai, Bettiah, Bhagalpur, Bihar, Sharif, Bodh Gaya, Buxar, Chapra, Darbhanga, Dehri, Dinapur Nizamat, Gaya, Hajipur, Jamalpur, Katihar, Madhubani, Motihari, Munger, Muzaffarpur, Patna, Purnia, Pusa, Saharsa, Samastipur, Sasaram, Sitamarhi, Siwan, Chandigarh, Ambikapur, Bhilai, Bilaspur, Dhamtari, Durg, Jagdalpur, Raipur, Rajnandgaon, Daman, Diu, Silvassa, Delhi, New Delhi, Madgaon, Panaji, Ahmadabad, Amreli, Bharuch, Bhavnagar, Bhuj, Dwarka, Gandhinagar, Godhra, Jamnagar, Junagadh, Kandla, Khambhat, Kheda, Mahesana, Morbi, Nadiad, Navsari, Okha, Palanpur, Patan, Porbandar, Rajkot, Surat, Surendranagar, Valsad, Veraval, Ambala, Bhiwani, Chandigarh, Faridabad, Firozpur Jhirka, Gurugram, Hansi, Hisar, Jind, Kaithal, Karnal, Kurukshetra, Panipat, Pehowa, Rewari, Rohtak, Sirsa, Sonipat, Bilaspur, Chamba, Dalhousie, Dharmshala, Hamirpur, Kangra, Kullu, Mandi, Nahan, Shimla, Una, Anantnag, Baramula, Doda, Gulmarg, Jammu, Kathua, Punch, Rajouri, Srinagar, Udhampur, Bokaro, Chaibasa, Deoghar, Dhanbad, Dumka, Giridih, Hazaribag, Jamshedpur, Jharia, Rajmahal, Ranchi, Saraikela, Badami, Ballari, Bengaluru, Belagavi, Bhadravati, Bidar, Chikkamagaluru, Chitradurga, Davangere, Halebid, Hassan, Hubballi-Dharwad, Kalaburagi, Kolar, Madikeri, Mandya, Mangaluru, Mysuru, Raichur, Shivamogga, Shravanabelagola, Shrirangapattana, Tumakuru, Vijayapura, Alappuzha, Vatakara, Idukki, Kannur, Kochi, Kollam, Kottayam, Kozhikode, Mattancheri, Palakkad, Thalassery, Thiruvananthapuram, Thrissur, Kargil, Leh, Balaghat, Barwani, Betul, Bharhut, Bhind, Bhojpur, Bhopal, Burhanpur, Chhatarpur, Chhindwara, Damoh, Datia, Dewas, Dhar, Dr. Ambedkar Nagar (Mhow), Guna, Gwalior, Hoshangabad, Indore, Itarsi, Jabalpur, Jhabua, Khajuraho, Khandwa, Khargone, Maheshwar, Mandla, Mandsaur, Morena, Murwara, Narsimhapur, Narsinghgarh, Narwar, Neemuch, Nowgong, Orchha, Panna, Raisen, Rajgarh, Ratlam, Rewa, Sagar, Sarangpur, Satna, Sehore, Seoni, Shahdol, Shajapur, Sheopur, Shivpuri, Ujjain, Vidisha, Ahmadnagar, Akola, Amravati, Aurangabad, Bhandara, Bhusawal, Bid, Buldhana, Chandrapur, Daulatabad, Dhule, Jalgaon, Kalyan, Karli, Kolhapur, Mahabaleshwar, Malegaon, Matheran, Mumbai, Nagpur, Nanded, Nashik, Osmanabad, Pandharpur, Parbhani, Pune, Ratnagiri, Sangli, Satara, Sevagram, Solapur, Thane, Ulhasnagar,n Vasai-Virar, Wardha, Yavatmal, Imphal, Cherrapunji, Shillong, Aizawl, Lunglei, Kohima, Mon, Phek, Wokha, Zunheboto, Balangir, Baleshwar, Baripada, Bhubaneshwar, Brahmapur, Cuttack, Dhenkanal, Kendujhar, Konark, Koraput, Paradip, Phulabani, Puri, Sambalpur, Udayagiri, Karaikal, Mahe, Puducherry, Yanam,  Amritsar, Batala, Chandigarh, Faridkot, Firozpur, Gurdaspur, Hoshiarpur, Jalandhar, Kapurthala, Ludhiana, Nabha, Patiala, Rupnagar,  Sangrur, Abu, Ajmer, Alwar, Amer, Barmer, Beawar, Bharatpur, Bhilwara, Bikaner, Bundi, Chittaurgarh, Churu, Dhaulpur, Dungarpur, Ganganagar, Hanumangarh, Jaipur, Jaisalmer, Jalor, Jhalawar, Jhunjhunu, Jodhpur, Kishangarh, Kota, Merta, Nagaur, Nathdwara, Pali, Phalodi, Pushkar, Sawai Madhopur, Shahpura, Sikar, Sirohi, Tonk, Udaipur, Gangtok, Gyalshing, Lachung, Mangan, Arcot, Chengalpattu, Chennai, Chidambaram, Coimbatore, Cuddalore, Dharmapuri, Dindigul, Erode, Kanchipuram, Kanniyakumari, Kodaikanal, Kumbakonam, Madurai, Mamallapuram, Nagappattinam, Nagercoil, Palayamkottai, Pudukkottai, Rajapalayam, Ramanathapuram, Salem, Thanjavur, Tiruchchirappalli, Tirunelveli, Tiruppur, Thoothukudi, Udhagamandalam, Vellore, Hyderabad, Karimnagar, Khammam, Mahbubnagar, Nizamabad, Sangareddi, Warangal, Agartala, Agra, Aligarh, Amroha, Ayodhya, Azamgarh, Bahraich, Ballia, Banda, Bara Banki, Bareilly, Basti, Bijnor, Bithur, Budaun, Bulandshahr, Deoria, Etah, Etawah, Faizabad, Farrukhabad-cum-Fatehgarh, Fatehpur, Fatehpur Sikri, Ghaziabad, Ghazipur, Gonda, Gorakhpur, Hamirpur, Hardoi, Hathras, Jalaun, Jaunpur, Jhansi, Kannauj, Kanpur, Lakhimpur, Lalitpur, Lucknow, Mainpuri, Mathura, Meerut, Mirzapur-Vindhyachal, Moradabad, Muzaffarnagar, Partapgarh, Pilibhit, Prayagraj, Rae Bareli, Rampur, Saharanpur, Sambhal, Shahjahanpur, Sitapur, Sultanpur, Tehri, Varanasi, Almora, Dehra Dun, Haridwar, Mussoorie, Nainital, Pithoragarh, Alipore, Alipur Duar, Asansol, Baharampur, Bally, Balurghat, Bankura, Baranagar, Barasat, Barrackpore, Basirhat, Bhatpara, Bishnupur, Budge Budge, Burdwan, Chandernagore, Darjeeling, Diamond Harbour, Dum Dum, Durgapur, Halisahar, Haora, Hugli, Ingraj Bazar, Jalpaiguri, Kalimpong, Kamarhati, Kanchrapara, Kharagpur, Cooch Behar, Kolkata, Krishnanagar, Malda, Midnapore, Murshidabad, Nabadwip, Palashi, Panihati, Purulia, Raiganj, Santipur, Shantiniketan, Shrirampur, Siliguri, Siuri, Tamluk, Titagarh

Monel 400 Alloy Round Bars Specification

Specification ASTM B164 UNS N04400
Grade Monel 400 – UNS N04400
Monel 400 Bar Stock size (Round) Diameter: 3-~800mm
Monel 400 Flat bar size Thickness: 2 -100mm
Width: 10 to 500mm
Monel 400 Hex Bar size 2-100mm A/F
Monel 400 Angle bar size 3mm*20mm*20mm~12mm*100mm*100mm
Monel 400 Square bar size 4 to 100mm
Section 3.0 to 12.0mm thickness
Monel 400 Channel Bar 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness
Monel 400 Billet Size 1/2" to 495mm Diameter
Monel 400 Hollow Bar 32mm OD x 16mm ID to 250mm OD x 201mm ID)
Monel 400 Rectangles Size 33 x 30mm to 295 x 1066mm
Monel 400 Round Bar Standard Dimensions Diameter / Height:
Finish centreless ground, Cold (bright) drawn, smooth turned, hot rolled, slit rolled edge, peeled, Rough Turned, Bright, hot rolled annealed, Grinding, Polish, Centreless Ground & Black
Surface Hot Rolled Pickled, Bright, Sand Blasting Finished, Cold Drawn, Hairline, Polished
Tolerance H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements
Technique Monel 400 Cold Drawn, Hot Rolled, Forged Round Bar, Cold Rolled, Rod
Condition Hardened & tempered, annealed
Monel 400 Round Bar Processing Bar cutting to 650mm
Form I/H Bar, Forging, Precision Ground Bar, Channel Bar, Square, Flat Bar, Round Rod, Blocks, Hollow, Rings, Triangle, Rectangle, Hex (A/F), Round, Threaded, Rod, Half Round Bar, T-Bar, Billet, Profiles, Ingot, etc.
Our stockyard location for fast delivery across India Bhubaneswar, Coimbatore, Ahmedabad, Agra, Pune, Mumbai, Thiruvananthapuram, Dhanbad, Shivamogga, Noida, Tirunelveli, Tiruchirappalli, Bengaluru, Pimpri-Chinchwad, Hyderabad, Chennai, Navi Mumbai
Our Monel 400 Round bar conforms to NACE MR0175/ISO 15156

UNS N04400 Monel 400 Alloy Round Bars Chemical Composition

Grade Ni Fe C Mn Si Cu Mg Ti S
Monel 400 99.0 min 0.4 max 0.02 max 0.35 max 0.2 max 0.25 max 0.15 max 0.1 max 0.01 max

Monel 400 Alloy Round Bars Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.9 g/cm3 1446 °C (2635 °F) Psi – 67000 , MPa – 462 Psi – 21500 , MPa – 148 45 %

ASTM B164 Monel 400 Alloy Round Bars Equivalent Grades

STANDARD WERKSTOFF NR. UNS GOST AFNOR JIS BS EN
Monel 400 2.4068 N04400 НП-2 - NW 2201 NA 12 NLC-Ni 99

ASTM B164 Monel 400 Alloy Round Bars Condition

H&T

Hardened and tempered.

ANN

Annealed

PH

Precipitation hardened.

Monel 400 Alloy Round Bars Surface finish

CD

Cold drawn

P

Polished

BD

Bright drawn

SRE

Slit rolled edge

CG

Centreless ground

HF

Hot finished

CF

Cold finished

HRAP

Hot rolled annealed and pickled

P&T

Peeled and turned

RT

Rough-turned/peeled

ST

Smooth turned

PR

Peeled and reeled

Monel 400 Alloy Round Bars Price

Monel 400 Round Bar Price in India

Quantity

Price List

Price of Monel 400 Hex Bar / Rod 10 (A/F) x 1000mm Length

1

$101.16

Price of Monel 400 Hex Bar / Rod 10 (A/F) x 1000mm Length

3

$256.52

Price of Monel 400 Hex Bar / Rod 10 (A/F) x 1000mm Length

5

$368.11

Price of Monel 400 Hex Bar / Rod 10 (A/F) x 2000mm Length

1

$182.65

Price of Monel 400 Hex Bar / Rod 10 (A/F) x 2000mm Length

3

$427.12

Price of Monel 400 Round Bar 10.0 dia x 500mm long

1

£63.00

Price of Monel 400 Round Bar 10.0 dia x 500mm long

2

£96.00

Price of Monel 400 Round Bar 10.0 dia x 500mm long

3

£128.00

Price of Monel 400 Round Bar 10.0 dia x 500mm long

4

£153.00

Price of Monel 400 Round Bar 10.0 dia x 500mm long

5

£175.00

Price of Monel 400 Round Bar 10.0 dia x 1000mm long

1

£81.00

Price of Monel 400 Round Bar 10.0 dia x 1000mm long

2

£129.00

Price of Monel 400 Round Bar 10.0 dia x 1000mm long

5

£264.00

Price of Monel 400 Round Bar 10.0 dia x 2000mm long

1

£120.00

Price of Monel 400 Round Bar 10.0 dia x 2000mm long

2

£202.00

ASTM B164 N04400 Monel 400 Alloy Round Bars Sizes

Type

SIZES (mm)

SIZES (Inches)

ISO Tolerance

Cold Drawn and Polish

3.00 - 75.00

1/8 - 3.00

h8-h9-h10-h11

Cold Drawn and Ground

10.00 - 75.00

5/6 - 2.50

h8-h9-h10-h11

Peeled and Polished

40.00 - 150.00

1.50 - 6.00

h11, h11-DIN 1013

Peeled and Ground

20.00 - 50.00

3/4 - 2.00

h9-h10-h11

Monel 400 Bars Standard lengths of 2010 mm up to 6000 mm. Cut to size on request (tolerance +2/-0 mm).

5.0

45.0

6.0

50.0

7.0

55.0

8.0

60.0

9.0

65.0

10.0

70.0

12.0

75.0

16.0

80.0

20.0

90.0

25.0

100.0

30.0

130.0

35.0

160.0

40.0

201.0

Monel 400 Alloy Round Bars Stock

Alloy

Product form

Dimension (in mm)

MONEL ALLOY 400 (66 Ni/34 Cu)

Hexagon bar

48.0 a/f, Weight=17.18 kg/m

MONEL ALLOY 400 (66 Ni/34 Cu)

Square bar, Rod, cold drawn

25x25, Weight=5.7 kg/m

MONEL ALLOY 400 (66 Ni/34 Cu)

Round bar, Rod, solution annealed, ground, polished

Dia=6.35, Weight=0.27 kg/m

MONEL ALLOY 400 (66 Ni/34 Cu)

Round bar, Rod, cold drawn, annealed

Dia=8.0, Weight=0.43 kg/m

MONEL ALLOY 400 (66 Ni/34 Cu)

Round bar, Rod, drawn, ground

Dia=10.0, Weight=0.7 kg/m

MONEL ALLOY 400 (66 Ni/34 Cu)

Round bar, Rod, cold drawn, annealed

Dia=12.0, Weight=1.1 kg/m

MONEL ALLOY 400 (66 Ni/34 Cu)

Round bar, Rod, annealed, peeled

Dia=16.0, Weight=1.9 kg/m

MONEL ALLOY 400 (66 Ni/34 Cu)

Round bar, Rod, hot finished, ground, annealed

Dia=20.0, Weight=2.9 kg/m

MONEL ALLOY 400 (66 Ni/34 Cu)

Round bar, Rod, cold drawn, stress relieved

Dia=25.0, Weight=4.5 kg/m

MONEL ALLOY 400 (66 Ni/34 Cu)

Round bar, Rod, hot worked, annealed, peeled

Dia=30.0, Weight=6.4 kg/m

MONEL ALLOY 400 (66 Ni/34 Cu)

Round bar, Rod, hot worked, annealed, peeled

Dia=35.0, Weight=8.7 kg/m

MONEL ALLOY 400 (66 Ni/34 Cu)

Round bar, Rod, extruded, machined, annealed

Dia=40.0, Weight=11.0 kg/m

MONEL ALLOY 400 (66 Ni/34 Cu)

Round bar, Rod, hot worked, annealed, peeled

Dia=45.0, Weight=14.0 kg/m

MONEL ALLOY 400 (66 Ni/34 Cu)

Round bar, Rod, hot worked, peeled, annealed

Dia=50.0, Weight=17.6 kg/m

MONEL ALLOY 400 (66 Ni/34 Cu)

Round bar, Rod, hot worked, peeled, annealed

Dia=60.0, Weight=25.6 kg/m

MONEL ALLOY 400 (66 Ni/34 Cu)

Round bar, Rod, hot finished, annealed, peeled

Dia=65.0, Weight=30.0 kg/m

MONEL ALLOY 400 (66 Ni/34 Cu)

Round bar, Rod, forged, peeled, annealed

Dia=75.0, Weight=40.0 kg/m

MONEL ALLOY 400 (66 Ni/34 Cu)

Round bar, Rod, forged, peeled, annealed

Dia=80.0, Weight=44.0 kg/m

MONEL ALLOY 400 (66 Ni/34 Cu)

Round bar, Rod, forged, annealed, peeled

Dia=85.0, Weight=49.0 kg/m

MONEL ALLOY 400 (66 Ni/34 Cu)

Round bar, Rod, hot worked, peeled, annealed

Dia=100.0, Weight=71.0 kg/m

MONEL ALLOY 400 (66 Ni/34 Cu)

Round bar, Rod, forged, peeled, annealed

Dia=115.0, Weight=92.0 kg/m

MONEL ALLOY 400 (66 Ni/34 Cu)

Round bar, Rod, hot worked, annealed, peeled

Dia=127.0, Weight=109 kg/m

MONEL ALLOY 400 (66 Ni/34 Cu)

Round bar, Rod, hot finished, annealed, peeled

Dia=130.0, Weight=118 kg/m

MONEL ALLOY 400 (66 Ni/34 Cu)

Round bar, Rod, hot finished, annealed, peeled

Dia=140.0, Weight=133 kg/m

MONEL ALLOY 400 (66 Ni/34 Cu)

Round bar, Rod, annealed, peeled

Dia=150.0, Weight=153 kg/m

MONEL ALLOY 400 (64Ni/34 Cu)

Round bar, Rod, forged, peeled, annealed

Dia=165.0, Weight=190 kg/m

MONEL ALLOY 400 (66 Ni/34 Cu)

Round bar, Rod, annealed, forged

Dia=170.0, Weight=196 kg/m

MONEL ALLOY 400 (66 Ni/34 Cu)

Round bar, Rod, hot finished, annealed, peeled

Dia=200.0, Weight=271 kg/m

 

Monel® alloy 400 Rod,

Diameter:3.0mm, Temper: Annealed

Monel® alloy 400 Rod,

Diameter:6.35mm, Temper: As drawn

Monel® alloy 400 Rod,

Diameter:12.7mm, Temper: As drawn

Monel® alloy 400 Rod,

Diameter:20mm, Temper: Annealed

Monel® alloy 400 Rod,

Diameter:40mm, Temper: Annealed

 

Applications Of Monel 400 Alloy Round Bars

  • Sea Water Equipment
  • Pharmaceutical Equipment
  • Specialty Chemicals
  • Pulp & Paper Industry
  • Gas Processing
  • Off-Shore Oil Drilling Companies
  • Heat Exchangers

Send Us Message

Got a question? We'd love to hear from you. Send us a message & we'll respond as soon as possible.

Call Us

8080998069 9820584986

Visit Us

 1st Floor, Plot No. 136, Deccan Chambers, JSS Road, Ambewadi, Mumbai 400004